Other Data Center Subjects

Hi, Team How to I get mib files with nexus 93180. I find reference below url, but this will not be subcequent linked, so I can not find OID information. ftp://ftp.cisco.com/pub/mibs/supportlists/nexus9000/Nexus9000MIBSupportList.html I want to kno...

Hello Team,   I am facing issue while configuring bfd under fabricpath interfaces, fabricpath is configured and I can see all the adjacencies on all the devices. Below is the network diagram.       When I configure BFD between AGG-A and EoR-A switch...

Hello, I have a setup with a 5696Q linked to TOR 2232TM-P  running version 7. I''d like to know if L3 ports are supported on the FEX and second question if routing (i.e. OSPF) can be sent through it. I found an article online and tried the commands ...

hi, my company is using cisco prime 2.2 appliance.  1) is there any way to check via CLi or the web interface, what OS version is it running? 2) if its on linux? is it affected by the Linux dirty cow? 

Hi Cisco May i know how can i enable the Netflow for Cisco Prime? Its mean if i want Cisco Prime able to collect the information from device by enabling the netflow. Do i need to configure the netflow configuration on each devices as per below guide ...

Hi, I have two DC's A and B, A has a pair of 7710's, DC has no Nexus kit in yet. I have 3 aggregation VDC's running on each 7k and a OTV VDC in each 7k as well. I am trying to setup OTV on the two OTV edge devices in DC A, just to learn the configur...

Kindly support regarding, between Cisco 4500X and Nexus 5672UP twinax cable 10m as a uplink will work????

I have OTV working perfectly using Nexus 7700 and OTV VDC.  All blades are F3.  However, when trying to do Vlan mapping over OTV (i.e. local vlan is 500 and remote vlan is 700), I cannot get any traffic through the tunnel.The research I've done says ...

Hi,  I have two 5596UP in a domain and they are connected single-homed with one 2232 each. I am having a server connected dual-homed with the two FEX. I am trying to create a port channel but after issuing the sh vpc brief I am getting the following...

Hi, I need to buy ASR1001-X for our DC, and it should have 2x 10Gig port, I could see, Cisco ask for  License ($7000 for each port) to activate 10GE 1-port. Please confirm, do we really need those Licenses ? Any comments will be highly appreciated. ...

I have two Cisco nexus switches are connected together by VPC on 10 gigabit  link , my question is is there any limitation on up-link speed ? for example can I use 40 gigabit up-link within VPC link is 10 gigabit link ? 

Hi, we're currently building a custom poap solution for our testlab using ansible. POAP process already works pretty good for N5K and N7K admin vdc. But for the non-admin VDCs cisco recommends the "voap.py" script (which I found on the DCNM installa...

Hello, We have a pair of ASA 5555X firewalls, and we want to set them up in a cluster. We have done the same on our HQ site where we have cabled them on a pair of 6807-XL switches in VSS. We would like to do the same on a new site, but the switches ...

Hi All, I am planing to upgrade our redundent nexus 7010 having redundent sup1, currentely running 5.2 to 6.2.12.Can any one share the procedure for upgrade plan via ISSU. Any detailed document will be good help :-)is it advisable to do via ISSU or v...