Other Network Architecture Subjects

i have a cat 6509 and 3550-12G doing vlan hsrp and it does work well, but i seem to have run into the 16 per group limit. and the switch will not allow me to create another group, i see this error when i try to add a vlan using the standy (group#) ip...

Hi,I am having 5-6 servers live on internet. I am connecting to an application on my clients server which needs one IP to be validated. But, I want to connect from all servers. Is there any way where I can mask all my server IPs into one and connect?

Can any AP expert explain why the switch port receive BPDU packets from AP1200??I had configure the Cat3550 ports that are connecting AP1200 to deny any BPDU packets. I find out the ports will error disabled by the system; it indicate the AP 1200 sen...

We have a combination of policy based routing and IP helper (DHCP relay) configured on a router interface. Since client DHCP stations use all 0's broadcast, there is an impact, depending on what order the router processes the mentioned 2 sevices. #1 ...

On one of our core siwtches that is running spanning tree I have noticed the following for the root for a spanning treeVLAN 47Spanning tree mode PVST+Spanning tree type ieeeSpanning tree enabledDesignated Root 00-00-00-0...

Does anybody know where I can find out the performance of a 2621XM (running IPSEC 3DES) when running AES. This is for a barebones box only (I.e. no AIM module). I have found the performance of all the AIM modules, but not for the software-only impl...

Dear sir,I am working in a Class A ISP. I want to detect whether any client is using any voice Traffic.Because Toll Bypass is illegal in our country.Please tell me the Free tool to detect Voice Traffic or advise me how can I detect it through Cisco R...

I have a 2MB WAN link transfering data of 14GB tooks 7hrs. How I can calculate the weather it taking more time the link i have or it is ok.

Dear All,I have littile confussion when i want to ping my localhost (self pinging) i am getting 10ml second latency ? it should be 1ms.can you please explain some one.thanks in advance.S. yadav

Hello could you please help. i would need to enable cos or dscp in our 2950. in fe there is a device which traffic needs to be prioritized and put i out gig interface. I do not understand your manuals could you please tell me if i am wrong if i do ...

Hi AllWhen I accessed the dial upo internet and when I checked the IP address I found these detaisl ipconfig:IP: 220.165.165.7SubentMask: 255.255.255.255Gateway: 220.165.165.71- Can the IP address be similar to gateway?2- Can subnetmask be as broadca...

We had 2 networks that were inadvertantly bridged. When this happened 1 of the networks crashed. The switches were rebooted and when they were the VLan interfaces needed to be manually started and once this occurred the network came back to life. At ...