Other Network Architecture Subjects

Hi, we're currently running cisco 2611 router. The problem is duruing busy hour many users try to download stuff from the internet at the same and that take alot of our bandwidth, that also slow down other user surfing the web. What i would like to d...

Hi, I have one Cisco router with two T1 lines to different isp and running bgp on the same. I have configured the router to get the udpates from the directly connected route likeIp as-path access-list 10 permit ^$ip as-path access-list 20 permit ^isp...

Hi AllWe're trying to span multiple VLAN's over two Catalyst 3524's. We've used VTP to mirror the VLAN setup/database on both switches and connected the switches using an ISL Trunk. The VLAN's work but the problem arises when data travels over the IS...

I need to reset my router to factory defaults and dont know how could I get someone to walk me through the prossess.MIke Gaeta

Good Day,I've got an older 4500 router. I'd like to upgrade the ios so that it can function as a dhcp server and implement nat.If possible, how do I go about doing this?Thank You

Hello,Quick question here we have a 2610 set up to use 2 T1's bonded for Multlink PPP with our ISP. If we unplug 1 T1 the whole bundle drops, even though the 2nd T1 is still up / up. Their IS supposed to be redundancy right?

Hi, allthese days keep thinking a foolish question, why we need WAN?differenct country's people can communicate with each other also without WAN by subscribing different service provider, then why we still need WAN?don't blame me for asking such a qu...

Environment:6500-Switch-1, switch port 2/16 connected to 6500-B port 1/1, port 1/2 vacant (active sup. slot 1, port 1/1 forwarding)6500-Switch-2 switch port 2/16 connected to 6500-B port 2/1, port 2/2 vacant (standby sup. slot 2, port 2/1 blocking)Qu...

I have a 3640 dialup router that our sales force dials into. I already have the idle timeout command implemented. Is there anyway I can have a user timeout after a certain time even if they aren't idle? Right now I have some salesman that aren't d...

Hi,I hv a cisco 7206VXR. I would like to know what is the max number of broadcast msg (eg. AAA msg) the router can send out in a second. Can someone pls help?Thank you.

Throughout our Cisco environment there are roughly 30 or more 3500XL (makes up about 70% of my layer 2 environment). The dilemna I'm faced with is securing port 23 access to these from an administrative standpoint. We use TACACS+ for authentication...

Hi All,I have a problem with NTP when customers remotely access our network through VPN.Customers have laptops running w32time to sync their clocks with the Domain Controllers. DC's sync their clocks to the Network Management Servers (NMS) and NMS sy...

Hi,I have a scenario where there are 2 vlans on a cat 4507R running 12.2 A video source with a encoder in vlan 10 will digitize the content and send it to a receiver in Vlan 20 that has a decoder.The problem I am have is that the multicast is not ge...

Can someone exlain the relationship between casuser ID and NETMGR ID in CiscoWorks 2000? I have problem where NETMGR ID is locked out very often. I was told by Cisco engineer to reset casuser ID password when this problem happens.Thank you,Santi