Other Network Architecture Subjects

I configured clustering with my switches and using CMS. I don´t hve any problem when Haven´t configured TACACs commands, but after I add TACACs configuration, cannot access the switches with browser anymore.I still get the first screen that ask for u...

Couple of questions about WFQ ;1) If a show queue tells me all conversations have the same weight...Does that mean that in effect, I do not have any flow being given better treatment ? If WFQ only giving weight based on IP precedence or is it smart e...

I'm using CM3.3 with Update 1 and last IDU.When I try to use Topology Group a generic error appears.I have found CSCea17100 but I try the first workaround without success!How can I correct this problem?Thanks.Andrea.

Hi,Can anyone tell me what is the hardware requirement for implmenting dynamic vlan and also the pro and cons for implement it.Thanks raymond

The past year I have had 3 Catalyst 2924XL-M failures. All the failures have occured in such a way that the devices connected to the failed switch still receive a linkbeat, so they still think the switch is functional. However, all layer 2 forwardi...

Greetings,I have a router question: Should a cisco 7206 with IOS 11.2 which is being upgraded to IOS 12.2 be able to boot from a FLASH DISK (ATA) which is large enough to hold the new flash? Right now this router boots from the IOS in SLOT0: which...

Hi ,How do i check if my core switch is filtering certain novell netware services/protocols like SLP etc ????Thanks

I'm currently monitoring a network with CiscoWorks2000. I have the following question: Device fault manager is configured to send notifications when IP devices become UNRESPONSIVE, Is there a way to make it send notifications when these IP devices b...

Hi, Can any one let me know the command to configure a ISDN PRI to dialout into another ISDN PRI.RegardsPatrick Pinto

Hi,When I issue the command "show spantree (vlan#) active, the output from the switch show something similiar to:-------snap------------Designated Root 00-d0-14-73-14-00 Designated Root Priority 8192Designated Root Cost 12Design...

I have a couple of busy AS5350's with about 150 remote sites connecting into them.I need to do some debugging on a couple of these lines but as there is alot of activity its not pratical to troubleshoot in realtime. Is there a way of sending all debu...

When my Cisco7606(with IOS ver12.1.13,two Sup2 with MSFC2) reloaded,the info always is :Autoboot: failed, BOOT string is emptyrommon 1 > I had to use boot command to start 7606 to normal working status.They other Sup has same problem,so redundence is...

my PC connect the 2924 by Console cable(COM2), everything seems ok, but it is about half hour, my HyperTerminal 6.3 can not display it. the 2924 absolutely works, why?

I am a network engineer in ISP.Currently we are running BGP in our networks.I faced one problem.I want to know how to block URL's using ACCESS LISTs without interferance of FIREWALL.we have not had any firewall to prevent those url's.but i want to us...

I have installed CWVMS 2.2 and I made the upgrade for PIX MC from 1.1.3 to 1.2. The Import process report no errors and warnings, Generate and Deploy was O.K , but in Configuration it’s not the Pix configuration. What is the idea ? To introduce in t...