i have one 2520, one 2514, one 2501, now 2520 is frame rely swith, and 2514,2501 connected by frame relay. 2514: s0 10.0.0.1/8 2501: s0 10.0.0.2/8 i can ping 10.0.0.2 on 2514 and 10.0.0.1 on 2501, but on 2514, i can not ping 10.0.0.1, why
1) A lot of equipments appear as Unreacheable (the seed= Cat 4506 and several Catalyst 3550) and they have the same configuration as other switches 3550 that are Reacheable.2) Also, it does not recognize Cat 4506 (appears as ciscoProducts.502), Cat 3...
we have a cisco 2610 router with both BRI and analog ports for remote access of users. We want some users to have "callback" enabled, but for some other users not to request callback.Can we do this on a per user basis?Thanks
Hi all,I would like to increase dialup connection speed for home users in our 2620 router, Currently running with 33kbps modem modules, Help me to know the mazimum speed of Modem modules avaliable nowadays. Can i install in my 2620 series router?than...
I was troubleshooting a network problem related to the size of packets, and for fun I pinged yahoo.com and found that the size of the ping matters. If I do a "ping yahoo.com -l 1272" the ping will work, but 1273 bytes or larger times out.I've pinged...
Hi AllI have a problem with my backup wirless link between 2 buildings.I am running rapid spanning tree over the primary laser link and I have got the wirless as the backup.When i am logged onto the cisco 2950 switch at building one and I disconnect ...
Hi, I have seen other postings similar to my problem but with no solution. Thus I wanted to ask again to see if any solution has been found. I am trying to push out a config change to all my equipment and everytime whether I try 1 router or all of ...
Hello,I have a situation where we have an application server on our internal network. I have a terminal server on the same network that is used to access this application server via a client program installed on the terminal server. I need to give ...
Anybody successfully running Gigabit Etherchannel from a CAT650x (cisco term) to multiple Sun Gigaswift NICs (trunking-Sun term)?Thanks for any tips...
Hi everybodyI've configured a switched enviroment with several 3524XL connected trough a 12-port 1000SX 4912. Due to the failure of one 3524, I've connected one Catalyst 2950 (IOS 12.1). Everything looked to be fine, but Novell Clients (IP based) do...
I am planning a HSRP implementation on two 1700 series routers. The two routers provide Internet access. My first requirement is to track the serial interface on the primary router and fail over to the secondary router in the event of failure on th...
I'm looking to write a script that will go to each of my routers and retrieve the configuration and write it to a file using a snmp get command string. Has anyone done this? If so what is the snmp command string to get the config from a 2501, 3640 an...
HalloI have LMS 1.2 installed on Win2000 Server. I have disabled the Terminal Sevices service before installing LMS , can i enable the Terminal Services service for Administration purposes aftre completing the installation of LMS.Note : I would like ...
