Other Network Architecture Subjects

Hello,I'm trying to limit the accessibility to the VTY ports on a 2950 that I have in a remote site. I've placed the following access-list:ip access-list std 10permit 10.4.0.0 0.0.255.255permit 10.1.0.0 0.0.255.255... On the VTY line, I've stated:ac...

We are having a problem that seems to be 7200-IOS 12.2T curropting PAP passwords. No such bugs recorded at Cisco. Has anyone heard of such a thing?Details:Our RADIUS server rejects some customers claiming that the password is wrong. After some tests ...

Fellows,Would really appreciate if anyone could shed some light on a BGP case that I have observed. We have a client that is multihomed to two upstreams via BGP: through us and through another one. From a certain looking-glass site, 'show ip bgp x.x....

Hi I'll install Catalyst 6509(Sup720, IOS 12.2.14SX1)but, I've trouble to find IOS Server Load Balancing Software[FR-IOSSLB].where can I download this feature set ?thanks in advance.Best Regards,crystal91.

A simple question, does sup 720 support both rpr+ & glbp?

Hello Guys,i am trying to configure the cat6509 and get this Prob:the layer 3 Modul is giving me this prompt: router (boot)# after rebooting the switxh i am not ´more able to connect to layer 3 SW01-6509GL7-11> (enable) session 15Trying Router-15...s...

Whats the difference between processor and IO memory? Would 90% of Processor memory used be a problem on a Cisco 1601.

As it stands at the moment, a user could come in after working hours, plug in a laptop, gets an IP address from the DHCP server and copy over sensitive data. We plan to implement some security on our network such that no one will be able to access da...

Hi, We are using policing command to control the bandwidth usage on Cisco C 3550 L3 Switch port. I am able to control one direction ( Ingress), but not other direction ( Egress). If we remove Ingress side and add Egress side, the command not shown in...

Can Router 3640-IOS 12.0(7) support E1 bandwidth? When we connect E1 bandwidth by two 2500 or 2600, they are working fine but when we connect 3640 to either 2500 or 2600, it fails.Please help!

Dear All,I’m having a problem on 6513 catalyst switch, let’s say I have 4 VLANs so I had created the VLANs on the switch and then configured the interfaceVLANs and the IP addresses and the routing is done correctly between VLANs, all PC/Servers in di...

Hi,Why we can not form a gigabit channel with 4 port on the 18 port gigabit module on catalyst 4006.We would like to form etherchannel between Catalyst 4006 (SUP3, IOS 11.1.13-EW1) and Catalyst 6500 (SUP2, CatOS 7.3.1).We are getting incompatible pat...

I have a small shop here and use a 2516 to connect to an upstream Internet provider via a T1 and have an ISDN BRI dialbackup line using a Motorola NT1D. I know all are old units, but they work well, mostly. A 2516 has two high speed serial ports a...