Hi all,Why do we need to configure a static route to a null interface. kindly try to provide me the answer on a BGP scenario and also a non-BGP scenario.Thanks & Rgds,Homin
I inadvertantly deleted some configurations from /var/adm/CSCOpx/archive/shadow however I can still see them in the GUI under RME>Configuration Management. How can I refresh what is in ../archive/shadow?RME 3.3 Solaris Thanks, ...
Hi, I have a frame relay connection to a remote site that is properly working. The issue is that this router needs internet access through our router. Even thought they can ping through the frame line, they cannot access the internet. It seems like...
I am trying to configure the syslog automated action and have gone to this site to check it up. http://www.cisco.com/en/US/products/sw/cscowork/ps2073/products_tech_note09186a00800a7275.shtml#topic6On running the script from the command line to do a ...
I met the all requirements to access the 4006-IOS from CV5.4. viewable the 4006 but cannot change the port setting(duplex and speed)..- CiscoView 5.4- Device package Cat4000IOS.cv50.v4-1.zip - 4006 SUP3, 12.1.13-EW1- Java 1.3.1- Browser=IE6.0 at win...
Hi,I have lots of Cisco switches on my network rebooting for no reason. Checking the syslog I don't see any errors just before they boot but this is happening on different switchs at random times.. Any ideas why?P.S This is happening on different OS...
guys...i am presently running ciscoworks 2.1 VMS/security Xeon 2.4 Ghz proc 1GB memafter a while the tomcat proccess seems to eat all the memory(plus a load of virtual) and i have to stop and start the cw2k deomon to fix it...sometimes re-starting th...
In the Syslog of Ciscoworks 2000, there are "dmgt 876, dmgt 480, dmgt 1372, and dmgt 504 errors with a number "00000569" at the end of the error line. My Daemon Manager WILL NOT START, stating a Windows Internal Error. Does anyone have any Ideas o...
I want to load IPM 2.4 on a server with 2000 professional and service pak 3, it only recommends service pak 2, has anybody done this type of setup and if yes was there any problems?It is on an existing Ciscoworks server that has the most recent vers...
I have been experiencing a unique problem over the last 18 months or so. I have a Cisco 1720 router on a Frame Relay Point-to-Point connection that keeps freezing up at random times for apparently no reason. This problem is easy to fix by just cycl...
Hi,I have one 3550-48-EMI switch and two 2945G-48 switches and they're connected as cascade configuration without redundant loop. 3550 has four VLANs and I'd like to allocate one VLAN for client computers only, and I also like to use two 2945G-48 swi...
Hi..I have just picked up a department that wants to transition from Novell to IP. Their Novell network sits in a /30 with only two hosts, a gateway and firewall. All 40+ clients underneath the firewall talk IPX. We have been given a new /24 addre...
Hi.. I'm trying to upgrade a member 2950 sw using the "system upgrade" feature on a 3550 cmd switch. old IOS for the member is 12.1(9)EA1 and wannt to upgrade to 12.1(13)EA1. The 3550 is at 12.1(8)EA1c. When I attempt the upgrade of the member sw via...
