Other Network Architecture Subjects

I have a cat 6509 switch with a MSFC card. I created a test interface on the 'RouterX' (MSFC) called vlan7. The ip address of the interface is 12.12.12.252/8Then I configured one of the free ports on the switch 7/33 to be in vlan 7.I put in a comput...

Our Supervisor module failed and we got the message :Astro Timeout Error Message and Block TX Queue and Blocked Giga port Error MessagesOn posting a quiery at the TAC they said tht this is a OSCILLATOR FAILURE.Can you please explain me what this fail...

what is the difference between:WS-X6548-RJ45 and WS-X6148-RJ45thx for your help

Hi,I would like help with the following:I have a core switch that will be connected to 4+ distribution switches. The distribution switches will connect to access switches, the Cisco three tier model. The distribution switches are L3 and are dual link...

Hello all...here is a table of Cisco Catalyst 2100 switch Catalyst 2100 - Port 25 Statistics Report Receive Statistics Transmit Statistics------------------------------------- -------------------------------------Total...

A while back, I was using the 2948G-L3 as a layer 3 distribution switch for my network. Connected to the switch were some DNS servers and Web servers. After a while of operation, the switch would lock up and stop processing traffic. The console ou...

A local consultant is proposing us the following network solution, and I want it to be validated by experts (I mean you...)We will have four fiber (1Gb/s) rings:OOOOon which there will be 5 Catalyst 2950 switches each (this is an industrial applicati...

hellocan i use :WS-X6182-2PA: module WANPA-8T-V.35PA-8T-V35B-OCT-V35-MTon the cat 6506, to make WAN connexions: PPP, FR, X25 .

The following statement in RME Availability Monitoring goes: Availability Monitor will show the "Last_Responded_At" value as "0001-01-01 00:00:00.000" which is a default value for SQL database timestamp field, for devices that appear as down.Question...

Hi, I need a advice on placement of following network equipments for my local area network. T1 coming to 2611XM, i need to have a firewall PIX 515E and VPN 3005 along with 2950 switch. What would be the best way to implement this network. VPN 3005---...

Is there a way to torn off DFM from polling the Serial Interfaces in a MGCP voice gateway? Otherwise it reports a fault every time a call is made and torn down. I would still want DFM to poll the T1 interface and the other interfaces... Just not t...

I had about 400 devices in my campus manager which were unreachable and I wanted to delete. I did a reinitialization and restarted the server. After the initial discovery - they are all back again. Is there a way to keep them from being discovered...

Can we monitor the number of ISDN calls that is active in a Cisco router through SNMP. Or is there other ways to get the info without telneting to the router. Thanks.

Hi Network Specialist, can anyone locate me a table from Cisco containing the subject mentioned? Thanks/elsie