Other Network Architecture Subjects

Hello,We're running CW2000 Campus Manager 3.2 with the latest IDU 3.0 patch, and we're having a weird problem. We recently moved a number of routers from Frame relay to PPP as well as changed the serial IP addresses. We've found that in Topo Servic...

Hi all.A have this problem:Management station OS - Win2K, Service pack 3 and CiscoWorks for Windows 6.1 (from Not For Resale Kit).Can I monitor or report in regular intervals for example Radio Frequency of AP 1100 by way of WhatsUp Gold (WharsUp Gol...

Hi all,I'm a little bit confused with a size of RAM in my router. With "show ver" it tells me, that I have 16 Mb. But with "sh mem" it gives me only 4 Mb. I didn't noticed that untill I started getting problems with "memory allocation problems". How ...

I have encountered a timeout-unknown error when trying to execute the command: "copy running-config tftp" on my 2600 Series router. I've had the same failure from two different tftp servers. These same servers have been used successfully with the s...

Hi All,We have two 6509's with 26 Vlan's on our Network. When we tried to configure HSRP , we could able to configure HSRP until 16 Vlan's . When we tried to configure HSRP for Vlan 17 , it comes with message saying that current version does not...

I have an AS5300 with 4 ports E1 and 60 MICA modems. I want to update that access server to 120 MICA modems, so I need to add another card supporting other 60 MICA modems.Since the AS5300 is End of Sale, which card do I have to add ?I suppose the car...

Good morning all,I have a network with a hub and spoke topology with FR.I do not have information about the Link speed and PVC size of existing connections.Can I find this from "show " commands on my routers without contacticting my SP?I do not have ...

I'm trying mpls features on DSLAM boxes and it seems like it works using TDP. All the release notes I was able to find on web site say LDP is not supported. What do you guys know about this? Thank you, Mihai

Hello colleagues,I am trying to set up rsh on one of my routers in order for a user on another router to execute certain 'show' commands. I keep getting a Permission Denied message, and I think I am missing something basic here. I want a user on rout...

HELP!!!I am currently migrating from TR to ethernet. I would like to retain the IP subnet currently in use for both sides of the network. BackgroundThe new ethernet network consists of a couple of 3550-12G at the core acting as L3 switches, linked to...

Please ignore this message.

Does anyone know what Operating System Platform does WLSE/HSE1105 run on? Is it Unix, Linux, etc?

Our network is rrunning 5 vlans. Recently the config was changed so that native is not running on a data vlan. Machines on one of our vlan is unable get outside of their vlan. All other vlans are working fine. This is the message that I get: . 00...

hy,is it possible to abort a traceroute (or extended ping) if i have a connection to a router through a Terminal-Server (line >2032)? the already known "strg-shift-6 x" command brings you back to the Terminal-Server but doesn't abort the traceroute (...

I'm curious about the blade-to-backplane performance of the new 48 port 10/100/1000 blades for the Cat6500 switches. According to the spec sheets, they connect to the backplane in the same way the other 6500 blades do (duh). However, I've heard some ...