Other Network Architecture Subjects

Hi Eveyone , i am stuck with an issue of eigrp metric change, it goes like this:i have servers based in HUB , HUB & Spoke are connected through theLeased line & VSAT , eigrp is running between them .Now we want to send the traffic from the server1 &...

Is there a command that tells you if cat5000 have NFFC?

My current Cisco consultant says that I don't need the "IP helper-address" statements on each interface. He put in a forward prot udp statement in it place but nwo I can no longer "see" anyone in network neighborhood. I have everyone registering wi...

Hello.I am trying to set up a test lab for frame relay. i have two 2620 routers plugged into one 2503 router with 2 serial ports. The 2503 is acting as the DCE for each. I am having two problems. I am unable to ping the router on the far interface...

The command debug ip packet allows only process switched packets to be observed. Fast switched packets are not displayed. Why ? How can i display the ip packet if i use fast switching?

I keep getting an error when I try to view anything within Campus Manager; "Cannot connect to ANI server."The ANI server is up and running with a few devices in the list.Anyone know why this might be happening?thanks,

I have 2 switch with an isl trunk beetween them (5505 and 2924). The trunk is up, the VTP client (2924) had learn the VLAN from the VTP server (5505) but users on other port of the 2924 have no connectivity (no DHCP replies).No router involved, VLAN ...

Hello everybody,i have 3512,3524,3548, switches in my network, so wht type of port security i can configure for my SERVER.please guide me.Thanks & Regards,Milind Tare

The extended ping command with sweep range of sizes option allows you to vary the sizes of the echo packets being sent. This capability is useful for determining the minimum sizes of the MTUs configured on the nodes along the path to the destinatio...

In a hub and spoke WAN topology, OSPF is configured as area 0 in core and area 1 on the spoke routers. One of the spoke router is connected has two router in that area 1. I wanted to allow only two subnets to be available in the end router R4. Is thi...

I have a cisco827 and a 3005 concentrator. I have been trying to use the web based CRWS config tool on the router. When I click on "easyvpn" and fill out the first page I then go to the second page and get prompted for "username, password and domain"...

Hello group,My problem is a simple one, but I can't really find a straight answer on the Cisco site, maybe you guys can point me in the right direction.All I need to do is make our Cisco 2501 router dial an ISP when a certain user launches their IE b...

Can someone please tell me whether it’s possible to connect two routers back-to-back using integrated T1 CSU/DSU?? I have a Cisco 3620 and a 1720 in a lab environment and trying to connect the serial interface on both routers back-to-back.If it’s pos...

What do I need to interconnect my Fast Ethernet Lan to an older ATM (Fore) LAN? Is there a switch that will support both the ATM and Fast Ethernet, or do I need a router?