Other Network Architecture Subjects

I want to configure GNS3 cloud with MS loop back, still having issues. I have added LoopBAck , shared with wireless adaptor. But now i cant see any adaptor in Cloud to select .

Hi, please see below the output from an IPSLA statistic command indicating to a 750 value of tail drop. Can anyone confirm that the value represents number of packets dropped and what would me a methd to correct the issue. The responder is set 3 hops...

Hello, I can't think of a more proper category for posting this one. I'd like to know if there is a cisco router (or other device for that matter) which may offer NAT service for packet using the SCTP protocol, i.e. translate IP address and SCTP port...

Dear Friend,I have Cisco 2600 series Router which has only 32 MB flash memory. I tried to load IOS image in that but image size is 29 Mb in compressed form. The minimum i found is 5 MB in compressed form but it is missing so many commands. Can anybod...

I have a very strange but reproducable problem across several similar MPLS ckts, ISR's and IOS versions.The problem is affecting voice quality in general.SetupCisco 2821 - 12.4.3a - same memory and hardware config on each ISRPE ----  MPLS T1 ---- CE ...

Hello Community;I have a design question. We have a Telco that is providing us with a primary(200Mb) and backup(50Mb) MPLS circuits. These circuits will terminate on a 2911 each. We run EIGRP and the Telco will be using eBGP. We re-distribute the BGP...

Hi All,Can anyone tell me if we can support Windows 7 professional and above on the Cisco SRE-700 and 900 modules?Any help would be appreciated.Kind RegardsRob

My recommended topology sceanrio as follows :                                                         Internet                                                            |                                                            |                  ...

Hi all,I need to implement VSS on 6500 equipped with Sup720-10GE and WS-X6704; considering that this last 10G card doesn't support VSL, I need to realize VSS interchassis connections on Supervisor 10G interfaces, but I only have X2-10G-LR. Considerin...