Other Network Architecture Subjects

All, Would you be so kind as to share your thoughts/experience with WFQ on high speed links? I know that Cisco generally considers it to be unnecessary on links greater than 2 Mbps. I have a client with a 16 Mbps HSSI connection between 3640 routers....

Greetings - I am trying to broadcast a dynamic route via EIGRP to our DMZ inside a CheckPoint 4.0 Firewall. Our Internal network is Private IP and the DMZ is public. Since the DMZ (network range / subnet) is not directly connected to our router I c...

Does anyone have any information about VLAN leakage? I'm unable to locate any good information about this topic...

Hi, Does anyone has successfully configured the ISDN simulator on Cisco 2600/3600 series router using the VIC-2BRI-S/T card? I have referenced couple of configurations on the news group and a web site, but I never make it fully works. It seems that ...

I have a Cisco 1605 running IOS 12.1.T and I want to forward pcAnywhere ports 5631(tcp) and 5632(udp) to interanl static IP of 192.168.1.11 with WAN IP of 63.243.20.218.... HELP Please be specific in replys for I know very little. I know how to get ...

When looking at serial interface stats for a T1, it states the Max bandwidth is 1152kbps. does that mean that the 392kbps is overhead?

I'm going to be migrating our main office link to ATM and leaving the branch offices on Frame Relay using AT&T. I've got a 3640 on the ATM side w/ a 4 port T-1 IMA card and mostly 2501's at the remotes.I'm going to be using two T-1's in an IMA confi...

i am a ccna, i am new to cisco, but i iam trying to setup a location witch has windows 2000 server running a dhcp server with two scopes mean two subnets, with about 75 workstation my problem how can i configure the routers to forward the right subne...

I am planning to integrate QPM with other NMS products. According to the information available from CCO QPM 2.1 is a standallone product. My questions to this:- Is this infromation correct?- Do you plan to provide APIs or XML interfaces to your QPM p...

How can I set multicast address on 8540 MSR?On C2900 I can use mac-address-table static "multicast address" "interface"!8540MSR uses IOS 12.0.Thanks.Andrea

How can I configure ISDN hunt groups.If I have two BRIs( in the main site) how can I configure these BRIs.In my situation I have few remote locations .These remote locations have ISDN as the backup for T1.How can I configure these remote sites to dia...

I want to use my CISCO 801 at home to dial the enterprise Windows 2000 RAS server using callback (to a number provided when it dials) and a static IP address.What commands should I add/modify to a standard configuration generated by Configmaker ?Than...

I am having some problems with my 3620 and want to backup the config. I can't back up the start-up because I get the error:C3620#copy startup-config tftpAddress or name of remote host []? 10.0.1.2Destination filename [startup-config]? y%Error opening...

I am rookie when it comes to vlans so please keep this in mind.What I am trying to accomplish is we have a 10.16.0.0/16 network.I want to create 2 vlans (to seperate traffic)like have 10.16.1.1-20 on 1 vlan and 10.16.1.21-40 on another, can I do this...

For IPM, after enabling the SNMP trap at Operations, how to use DFM to receive the trap?Thank you.