Is any body have seen this error message on an C3620 with 8 ISDN interface cardthank's for help*Mar 6 03:05:25.689 ECT: %ISDN-4-ISDN_UNEXPECTED_EVENT: calltrkr_call_cleared:no idb: Occurred at ../isdn/isdnintrfc.c:29819
I have a cisco 4000 at my posession. I know it is possible to make this router acting like a frame-relay and/or X25 switch. Recently, I received an NP-4B (4 ISDN BRI outputs) to put into this 4000. Is it possible to make this 4000 acting like an ISDN...
Hi to everybody,I've two customers that are using a Cisco 3660 with an E3 interface, both have oam problems:sometimes the VC configured went down, no more ATM traffic but the ATM link is OK. We do NO OAM PVC MANAGE and ATM traffic flows.It seems that...
A client needed a 100Mbps connection between two offices that are located approximately 3 miles apart. Short of laying cables between the two offices, what are the combined of equipments that can be used to accomplish this? I have been looking into a...
How can I assign a different OSPF COST to differentVLANs if I am using a 6500? I can reach with IPusing OSPF an specific IPAddress through three different VLANS or ports. How can I do if I wantthat each different path has a diferent cost(weight).
I posted an earlier message with respect to our Catalyst 2900 Switch and it seems to be a hardware failure. I need to have it repaired. How do i go about this? Thanks!
I will try to solve this through this forum first and then if I have no success, I will try a TAC case: Im using Campus Manager 3.0. In User Tracking, I discover approx. 1800 MAC addresses. Of these, I will have only 59 HostNames and IP Addresses....
IOS 11.2 on Cisco 7206. When I copy e.g. IOS of 4 MB only one packet of the flow is reported to the NFC. Is there anything to configuere to get the full flow?Thanks, Christof
We add a new cisco device on the network. As long the snmp community name is the same as defined on the CW2000 Server the Topology Services ( Layer 2 view ) automatically show this device after running rediscover devices. In another situation we n...
Tengo un cliente que tiene en un servidor Cisco Works, pero se observa que la aplicación esta demasiada lenta y en la mayoria de las ocasiones no pasa de la pantalla del login, cuales son los requerimientos básicos para la funcionalidad ideal del mis...
Has anyone worked with inter-vlan routing on a 4003 routing module? I have only worked with the Cat6009 where we define Vlans an interfaces and assign networks to those interfaces. I recently inherited a 4003 which has vlans that seem to be routed vi...
I am using Dialer profiles with locally defined usernames, on a 3620 with IOS 12.1(11), fast ethernet, 2 E1, 30 MICA modems.I want to have some users to be allowed to call only from specific ISDN numbers, and some other users to be allowed access fro...
Hi all,GOt a problem with one of my catalysts, and it is showing 100% processor util. THe main culprit is the L3Aging process, but I can find nothing on the Cisco site to help. Has it got something to do with MLS or netflow? Any help much apprecia...
I have a DLCI bound to an interface that I would like to remove. How can I do this? I tried just negating the command with "no" but it doesn't seem to work.
I bought a Cisco 806 Router and I'm having trouble getting E1 to obtain the IP address from Cox Communications via cable modem. I've tried the default settings, as well as custom settings. I've upgraded the IOS to c806-sy6-mz.122-4.xm.bin. When I ...
