Hi everyone! I am wondering anyone knows of a good design document or a list of pros and cons available when deciding to use Point-to-Point or the default (multipoint inverse ARP) configuration on Frame Relay networks?
I have a 1601 that is being used for internet access. It has the firewall software, and is configured as a NAT with all addresses mapping to the external router interface IP.My ISP has assigned me a range of IP addresses, which I have not used at al...
I've installed Cisco WAN Manager, or CWRW.I am trying to check out the In/Out packets, crc errors and so on over router interface.How can I verify that values ?Do I intergrate OpenView or other NMS tools?
Hi,I am currently running a contiguous EIGRP network. There are 3 routers in the backbone, routers A,B, and C all directly connected via a lan connection. Various remote sites connect to any of these routers via different media types such as isdn, fr...
I am new here and I don't know if I am in the right area but I have a question that may be answered by one of you (hope). When I go into the c2600 and do a 'test int serial0/0' I get a timeout problem.. 0 pass 1 failed. Does anyone know what this mea...
I am now designing a multi-access network in which the POTS, ISDN, N*64kbps,ADSL(DMT and lite), SHDSL, LAN(10/100M) interfaces are used. I am not so clear about how to calculate the upstream bandwidth needed for these blended services, is there any c...
We have immensely collision rates on 10/100tx ports connected to Lancast (Metrobility) media converters. To these are connected clients with ati2450 NICs. Though the collisions are above 10%, the network performance for the clients is not visibly red...
I have a printer that keeps disappearing from the network. When the printer goes down the interface on the switch (3548) stays up, but the Mac Address entry is deleted from the table. I sort of have two question. First, is it normal for a port it ...
Hello,As I use 6509 DHCP services to support multi-vlan, when one user log on domain in one vlan using windows 98 platform, after he move the pc to another vlan he can not get IP and log on the domain again, even have already set 'portfast'. Only use...
We are in progress in designing a LAN infrastructure for a customer who has bought 1x 6509 with 2x SUP2+MSFC2. The customer would like to have around 30 VLANs, each with IP/IPX routing enabled.HSRP groups will be configured for each VLAN between the...
Hello,I need to deplay a NAT device to a home office so that the user will be able to connect multiple computers to a cable broadband circuit that normaly configures only one machine for Net access via DHCP. I am considering the 806 router. Can it ac...
I have a workstation running an application that looks for data on one specific IP address. It can only look up one IP address. That workstation is connected to a 2610. The 2610 is connected through frame relay to 2 different 7206's via 2 different P...
