Other Network Architecture Subjects

On a new device i have this problem:Slot: F0,   Running state               : booting  Internal state              : offline  Internal operational state  : booting  Physical insert detect time : 00:00:53 (16:08:18 ago)  Software declared up time   : ...

Our environment consist of two core switches 6509 running hsrp, vCenter 4.1 (ESXs).We formed a MS cluster with 2 vm guest, one in ESX1 and the other one in ESX2.Each ESX have three uplinks to core switches 6509s.We configure the router according with...

Hello guys, I have some questions about the new Cisco tool KTN (Know the Network).1 - Can I run the software via VPN on the network I would like to discovery?If yes, Should I put the mac address of my network card or of the vpn adapter?2 - Can someon...

I've got a problem with dynamic vlans. Trying to figure out configuration for the topology similar to the one in the picture.I’ve got four vlans for PCs, one vlan per department. I have to add fifth vlan (50) for devices that can be connected to any ...

Hi,  After a power failure my As5300 start to give this error messagerommon 2 > boot flash:c5300-js-mz.123-18.binloadprog: error - Invalid image for platforme_machine = 35, cpu_type = 59 boot: cannot load "flash:c5300-js-mz.123-18.bin"orrommon 3 > bo...

Hello experts !Have found a one Cisco product 1601R. Does Cisco have a external fiber transceiver module and cable for AUI Ethernet port? If not so could someone desing a schematic that I could make my own. I don't know anyting about data communicat...

I need some help, iam going to have ADSL and want to create a BVI interface with my vlan bridged, i am trying to get the wirless to work in DHCP and it connects but i can not get a IP address can someone please either explain how to do it or put a ba...

Hi!I'm trying to install the LMS 4.0 in a Virtual Machine (Windows Server Standard SP2).After we downloaded the file from cisco website and we run it, we get the following prompt:>SetupNew\setup.cpp (143)PAPP:PVENDOR:PGUID:$@Windows Vista Service Pac...

hello -  (total and complete newbie here)i have been using a couple of different dlink routers that have port redirection.from my research (and much to my surprise), there appears to be no linksys routers that do this.are there any "beginner" cisco r...

I have two T1 WICS see show inventory below. Can anyone tell me what the VID: 1.0 and 1.1 are. I assume they are some sort of software version.1. Anyone know if there are any bugs with 1.0?2. Can they be upgraded?NAME: "WAN Interface Card - DSU/CSU T...

Trying to understand the class-default for markingI have the concept of Identify traffic with ACLsClassify traffic for marking with class-mapsMark traffic with policy-mapsthe policy-map will always have a default-class for unaccounted traffic in the ...

Hi AllI thought that putting an ip address on the outside interface,the inside  secure interfaces, a default route to the outside interface, a couple of  NAT statements was all that was needed to get an ASA 5520 working. And that was basically all th...