Hi , I have 2x 4506(supV-10GigE) switches. I am having problems getting the Port-channel to bundle between the two. I have the following settings on ports. See attached.
Hi AllI need advice.At my former office, we used to have another vlan e.g. vlan 10 for management vlan purpose so that we do not use default VLAN 1 to access the switches which i think is good for security purpose.Now how can I convince my present co...
Dear Expert,I'm currently trying to make our core switch 3550 to redirect all port 80 connetions to our Trend IWSS. I have added the below command:1. ip wccp web-cache 2. interface Vlan # ip wccp web-cache redirect inI have connect the Trend IWSS s...
HiI need help with memory req. for upgrading from CatOS to IOS.I have a cat 6500WS-X6K-SUP1A-2GE WS-F6K-MSFC264 DRAM 16 FlashAnd I want to use native IOS. 1. Can I upgrade memory to 128/256/512. what do I need?2. When i was looking for IOS for Sup...
hi,i have two routers interconnected(1700 & 2600 series)in lab environment.i cannot ping from each host of one router to the host of another router. when i am running ping command from one host it is giving the following reply:"Reply from 192.168.40....
Hi,I've been battling with an annoying problem where netflow v9 data from a 3725 router has been going awol when it reaches my F5 load balancers. what i have come down to is finding that the F5 boxes are rejecting the UDP packets as they have a size ...
Hi,This is very wierd. I was copying and pasting a config to a 2600XM router, all of sudden the whole hyper terminal window changed to some wierd looking window i've never seen before.Now whenever i try and access the router using hyper terminal (con...
All, I am trying to implement STP load balancing from shop floor to core network.vlan 13 (voice) over 54 wlan bridging linkall other vlans (data) over terascope linksCould you guys confirm attached topology (viso)
We got some Cisco catalyst 3560 that we want to control the bandwidthon the ports. Can this be done, and how do i do it?Ive got 3550s that can do policy-map with the interface command;service-policy output(and input) <policyname>But 3560 only seems t...
Hi,I try to connect to the LAN switch by following the instructions with DHCP-enabled PC. With any PC, broswer, OpSys when I type the a browser cisco.com the result is an attempt to access http://169.254.0.1/espress-setup.htm which is expected. But "...
We have several remote locations that we just installed Aironets at. All the locations are setup to forward DHCP packets to our centralized DHCP server(s) via ip-helper. Here is the situation. I took a wireless client to location A (10.10.0.0/16),...
Hello! I'm trying to replace a Windows Server using a 2821 router.INITIAL SITUATIONServer --- 2950 --- router- Server: 10.0.6.230/24- Router: 10.0.6.10/24- The router interface can be pinged from the serverFINAL SITUATION2821 --- 2950 --- router- 282...
