Hi, just wanted to know the upgrading proceedure on CatOS on Sup2 in 6509 is correct?copy tftp bootflash: Cat6509> (enable) copy tftp bootflash: IP address or name of remote host []? 10.10.10.2 Name of file to copy from []...
I have been trying to get RSPAN working on my two 2950 switches.Earlier I had enabled SPAN on my switch (say Switch1) with Snort monitoring port fa0/24 and everything worked fine.Now, I have another 2950 switch (say Switch2) which I have connected vi...
I have LAN network, and about 500 clinets, can anyone tell me the TCP and UDP Ports which should be blocked through Access-list in our network, Becuase i would like to secure my network from external intrusion.Thank You
if I have a specific network going to one router and a default route via another router, if the router with the specific routes pointing to it goes off, will it use the default route ?
Here our provider links all our sites via point to point crypto maps on a wes circuit, will all these point to point maps be on there own /30 masks, how are these set up with regards to addressing etc ?
Hi guys,How can we disable the visrtual interfaces that are used for infrastructure devices comunication? On ciscoworks we receive many alarms of performance because of that virtual interfaces :( All the 1100 and 1200 APs are configured as root devic...
if a line card in a CAT 6500 is suspected to have an intermittent hardware fault, what is the procedure to run enhanced diagnostics or extended hardware diagnostics on that line card? Can this be run online or only at boot time? Any pointers to any d...
WS-2950G-48-EI switchAll 48 of the 10/100 ports have portfast enabled. I have a dlink dss-8+ switch conencted to one of the port. 2 of my win xp pro workstations are connected to the dlink switch. When I first start up the workstations and log in ...
Hi forum,we are using 3com switches, the 3com switches implement open vlans, which mean if an ieee 802.1q packet is received at a port and the port is not a member of that vlan, the switch does not perform vlan filtering. if the address is previousl...
I have a 6513 with SUP II. I need to get it to Native IOS. When booted from the IOS in slot0 (giving the boot slot0: command in rommon mode), it boots but goes in Router(boot)) prompt. I think it goes to its CAT OS features. What is this prompt? doe...
Dear all,access switch is connected to base switch and base switch is connected to DHCP server, however users are connected to access switch are not getting IP address. Hence i would like to know the solution from experts.I remember there is a comman...
I have 2 switches running at the moment and I want to plug a 3rd in. Will I lose Network Connectivty with the Master and 2nd switch while it synchronizes with the new 3rd switch? or will it not affect anything ?
