Has anybody seen it before where a PC is requesting inline power - and then the link flaps because of it? I don't know if it's my 3560 or the PC but I think it's the PC.
Has anybody seen it before where a PC is requesting inline power - and then the link flaps because of it? I don't know if it's my 3560 or the PC but I think it's the PC.
Hello, I need some clarification on how to setup l3 switching and intervlan routing with a 3550 switch. The 3550 is connected to 2 switches with several vlan's. Thanks for your time
Hi,Have a client whose IOS 6500/sup720 shows the following output:----------show output--------Core_2#sho spanning-tree vlan 1Spanning tree instance(s) for vlan 1 does not exist.--------------------------------------Config Excerpt--------no spanning-...
I have a Syslog server configured in my network.The Cisco 6509 switch has been configured to send SNMP traps to the syslog server by using the command:snmp-server host 10.40.70.1 publicDo i need to put in the following command as well :logging 10.40....
HiI would like to be able to monitor multiple RSPAN sessions from multiple switches. (for example i have three VLANs I want to monitor on three switches all to have a destination of three Ethernet interfaces) Ideally I would like all the RSPAN sessio...
Hi: I add a NME-16ES-1G-P to Cisco Router 2811. After I add the module I haven't found a way to make the hosts connected in the module to see the router interfaces. Thanks in advance for any help.
Hi, I have a Catalyst 6509 switch. One HP Linux machine and one Solaris machine are directly connected.Gated process is running on both machines for ospf.The problem is some times i see low throughput when i do ftp from linux machine to solaris mach...
I am unable to reach the internet using SSID TKCTS. Everytime it associates it is given a IP 192.168.1.103. However my fastethernet0 connection I have setup as DHCP and I get the correct ip 192.168.112.2. What am i doing wrong. attached is my con...
Hi guyswhat does the pri stand for in the 802.1Q tag? Thanks
Cisco 6509-E with two SUP720 in my environment I would like to achieve Active / Active with load sharing between the two SUP720, can this be implemented, please advice on configuration.
Hi All,I would like to find out if there is some way our sattelite sites can register with Microsoft's AD integrated DNS services when the clients at this location use DHCP delivered by a Cisco 800 series router.Is there some sort of helper address o...
Hello I have a fiber connection I want to utilize between a 6513 and a remote (MAN) 6509. The 6513 is hybrid (not my doing) and I will have the 6509 native. The MSFC on the 6513 has no physical ports on the MSFC.Heres what I want to do: I want to ...
We had a new network installed around march. To save money, we used the catalyst Express 500s. We setup Cisco phones as well. 7 buildings, all connected with fiber. The data was rock solid, no issues at all, but the phones were another matter, ve...
Hi, i have next supervisor with IP Routing card:1000BaseX Supervisor WS-X6K-S2U-MSFC2 Multilayer Switch Feature WS-F6K-MSFC2My question is, can i use it with two WS-CAC-1300W ?Thank you, regards.
Dear all,I have a problem in my LAN. I have added two vlans : one for DATA and the second for voice (/24). For the data vlan, i have pcs and printers, but i want add a special config for some users who work with a new application (installed in Server...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-01-2025 08:24 AM | ||
07-22-2025 10:30 AM | ||
01-22-2025 07:00 AM | ||
12-30-2024 06:12 PM | ||
11-14-2024 09:33 AM |