Other Network Architecture Subjects

Hello,I would like to connect my PIX w/ GE port to a 3560 SFP. Both are multimode. I know the PIX is a standard SC connector but I am unsure whether I can connect a standard SC to SC cable to the GLC-SX-MM= adapter on the 3560. Please let me know ...

Here is the problem we are having , we have a 2950 hooked to a 6509 hybrid dist box with approx 90 vlans on it . We hook up a new 2950 and we get the following message, Dec 21 19:47:45.116: %SPANTREE_VLAN_SW-2-MAX_INSTANCE: Platform limit of 64 ST...

Hia,I have 2500 series with a network attached to e0:10.0.100.1 255.255.255.0and e2:10.0.200.1.255.255.255.0Clients on each network can ping the network interface ip, i can ping both interfaces from hyperterminal but clients cannot ping interface or ...

Impossible to connet 2 ports 1000base sx agrouped via etherchannel / lacp or pagp between a catalyst 6509 and a hp procourve 9308. Please do you know he best configuration? thanks in advance

I want to get rid of a VTP domain out of this box but can't find the command to do it. Here is the config:vtp domain ENGLABvtp mode transparentENGLAB-6513-Native#sh vtp statusVTP Version : 2Configuration Revision : 0Maxi...

Hi,I have a 6509 running CatOS 6.4. I want to remove those unnecessary port channel configuration entries from the configuration file or set them to default, so those entries won’t show up in my configure file. Especially there are some port channe...

we are in a University network where in a department 8 2950G-EI-24 switches have been stacked with GBIC 3500 XL modules without any loopback.this department connects to a core switch 4510.Very frequently LED of one of the switch's GBIC stack slot goe...

If I want to use my loopback interface to advertise for my eigrp, how do i do this, I have 2 routers both plugged in via ethernet on a 10.0.0.0 netork, loopbacks are configured with a 192.168.1.0 network, i have advertised both these in eigrp, but it...

Can anyone tell me why use loopback interfaces for routing protocols, I cant see why we would need to set one up ? I have set one up on my routers and for a test I removed the ip address from the ethernet interface to see if I could still see the loo...

hi,I would like to know if cisco IOS is able to share equitably bandwith between two connection thats belong to the same class,for example, if a create a class called FTP and I give 50 kbits/s (or 50% of my bandwith 100 kbits), if the first user star...

If I have 2 sites. 1 router on the remote site has say an ip address of 10.1.1.1/24 and the serial is ip unnumbered, and the main site has a router with its Wan ip on the same subnet, would the router on the main site need a route on it pointing to...

Please find the diagram attached to this, my requirement is 1 server having 2 NIC's, both the NIC's are in different network, now when a user 10.186.1.1 wanted to communicate 10.2.1.1 it is possible,same time he can able to reach 10.3.1.1 because "ro...

Hi,Please refer the attached image.Assume that:* Switch 111 & Switch 444 are running either STP or RSTP. * A broadcast is going on* SW 111 is the root bridge* All ports have the same port priority* Port ID = Port number (port number is labelled in t...