Other Security Subjects

Just had my work laptop reimaged and need to import a .pcf certificate file into my Cisco VPN client (v.4.0.4 I believe). When I attempt to do so, I get msg. 'Error 39: Unable to import certificate'. Running WinXP Pro SP2, logging in locally and am p...

We are starting a project to replace most switches in our network. I was tasked with verifying the deleted configs could not be undeleted. So will a write erase (IOS) and a Clear config all (Cat OS) permanently delete the configurations? Are there...

Can you reset or clear the hitcounts on ACLs? (pre-7.0 if it makes a difference) If so how, and can you clear it on specific ACLs while leaving others alone?thanks

HelloI'm connect through vpn by vpn client 4.6 on ezvpn server with split tunneling. I can ping all ressources (servers) and every thing on Internet. The problem is that I can't access my inside network from the distant pc but I can ping them.Thank y...

Can someone give me an example of how to use a static to an access-list? I am running version 6.3.3 and if I issue the command "static ?" it gives me access-list as one of the options. I can't find an example of the syntax anywhere and the lack of co...

Does somebody tell me if can I deploy an a tunnel GRE from PIX to ISA Server Microsoft ?If so , is there an a document about where I can read commands ?Best regardsLorenzo

Hi,Since I upgraded my PIX 515E in 7.0.1, I can't recover a CRL !I did a "debug crypto ca", look my result :CRYPTO_PKI: status = 0: failed to select RA encrypt certCRYPTO_PKI: status = 1799: failed to sign the dataCRYPTO_PKI: status = 65535: PKCS7 wr...

I am setting up an ISA server in parallel with the PIX. I will keep all traffic blocked from the Internet to Inside (Security100) interface but want to allow everthing inbound from the Internet (Security0) to the DMZ (security50) interface. The ISA S...

Can any one tell me the concept about LDAP ???I googled to lear about LDAP and i c't get any thing clear.Help me by providing a link or by breafing the concept behind that.Thanks in advanceRajesh

Has anyone tried running CSA 4.5 on a server running PolyServe?

I have a Pix 525 running 6.3(4) and 256mb of RAM. The CPU utilization today has been consistantly at 50 - 60 percent utilization. Is this too high? I don't know if this is normal for the environment because I don't have any long term trends.

HiI want to set an access list on a 6509. Is there any way I can group some tcp or udp ports under an alias (I mean like grouping telnet, ssh, ftp under another name) so I make the list easier to handle?Also the same thing about networks (to group so...

hello all,Is my following understanding correct? Port Address Translation (PAT) will work only for portocols that has ports (UDP, TCP) and will not work for portless protocols such as ICMP, EIGRP, OSPF, ESP etc. This applies to PIX and IOS as well.Bu...

hi guys im working on a campus network just got the network up and pix 535 has been installed, according to my knowledge pix will allow all traffic from high security interfaces to low security interface and i know its the truth. my iisue is ve...

Recently responsible for a pair of FWSMs in seperate chassis. Showing average CPU around the 85-90% mark and sporadic pkt loss. Analysis of two "sh proc" 45secs apart shows approx 90% of time is on the "fast_fixup" process, next highest is i82543_tim...