Hi there!I have 2 dsl line but only one is hooked up to my pix515e, would it be possible to connect my other dsl to boost up speed? if so how would I do that?Any suggestions are welcome,Thanks.cym
Hi there!I have 2 dsl line but only one is hooked up to my pix515e, would it be possible to connect my other dsl to boost up speed? if so how would I do that?Any suggestions are welcome,Thanks.cym
Are there such commands? The sensors are at 3.1(3)s34.Thank you
Hello all, can anyone tell me how to interpret syslogs on my router? The first few words are date, time of log. But what does the rest of the stuff mean? Thanks in advance for any help!
Has anyone experience with IPSec over GPRS?I have troubles in getting LAN-to-LAN IPSec with two 805s running. Initially, the connection works (ping), but after some seconds/minutes the ISAKMP SA's will get deleted:deleting SA reason "death by retrans...
In the past 4 days I'm seeing a lot of 105005 messages in my PIX logs.105005 (Secondary) Lost Failover communications with mate on interface 5I then see 105008, which tells me it's testing the interface.Then 105009 saying the test 'PASSED'.10 instanc...
I am using DSCP values (26 & 46) to mark my voice packets in the service policy. If I apply the policy to the physical interface, do I need to to use qos-preclassify in the tunnel interface ?
What is EDNS0?
IOS router 12.1 dialing into Internet using ISDN and can establish the IPSEC tunnel with the PIX at the remote end. PIX configured with dynamic IPSEC config for this connection. Tunnel is established when a ping is initiated from a PC behind the rout...
I have one hub(cisco 2621)(2M link) and 9 spokes (Cisco 1721)(512k link) network. I am using Multipoint GRE with NHRP to interconnect them and I am running OSPF. My spokes always recieve about 10 following messages per day.%NHRP-3-PAKREPLY: Receive R...
Does this affect all Cisco PIX firewall version, including 6.3(1)?Need a quick answer.Thanks,Emanuel
How do you account for spaces in the regex string? Suppose I wanted to match on the word "thanks." How can I set the custom sig to account for the space before and after the word, as well as making sure "thank" doesnt show up, only "thanks." I hav...
We are using the RDEP subscription to retrieve events from the sensors. One problem is we currently have 2.6 millions events (in our test environment) per day and it seems that the maxNbrofEvents of the RDEP subscription request is 500. So, it take...
Hi,I recently received my upgrade/recovery cd for upgrading my 3.0 sensors to 4.0 and have been having upgrade problems. I am attempting to upgrade 4230FE app sensors running 3.1.3(s38+)sensors and cannot get them upgraded.It seems that during the up...
Hi, I came across the SummaryKey parameter for V4.1 sensors. Is there an equivalent parameter in V3.1.4, or a way to tune the signatures in a similiar manner - option to use source address, or destination address, or address set for summary counting...
Does anyone know how to clear the number of users on an IDSM-1 blade. It seems I have users hung, I am unable to telnet to the blade or to connect via the Management Center.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
09-30-2024 10:06 AM | ||
09-04-2024 12:11 AM | ||
08-14-2024 02:32 AM | ||
08-13-2024 10:56 PM | ||
08-07-2024 05:42 AM |