Other Service Provider Subjects

Sir/Madam,1. Where can i find a document in CISCO site saying WAN link should not exceed 70 percent utilization. Should the WAN link exceed the treshold 70 percent level, end user need to upgrade the bandwidth of the link.2. I need to send the above ...

Hi all,Lets say I have a 10Mbps link to my upstream and I want to know why isn't the bandwidth calculated as 20Mbps as I have 10Mbps for download and 10Mbps for upload. Isn't 10+10 = 20? Hope someone would be kind enough to clarify this for me.Thanks...

hey all, anyone replace their redbacks, (SMS-1000 or SMS-1800) with cisco? If so, which platform worked well? The question is general but we can look at all the cisco specifics for feature requirements on our won. thanks a lot, robert.

Hi,We have one requirement from our customer side. They want to make Video conference between Two Locations With The help of Cisco CCM and Presence. One side Customer Ready to give Pri Link (E1), other side they are offering 3 ISDN (BRI) Link, I woul...

Dear all,I wanted to know why do we enable sparse mode in SP cloud when we are using SSM also. (ip ssm default). Since SSM dosent need any RP then why we need the sparse mode together to be used with SSM in the SP cloud.

Is it possible to do this?Regards,Gustavo.

We have some LNSs running 12.4 SP Services, running with the following config (qos specific lines and currently not working):!class-map match-all voice-signaling match access-group 101class-map match-all voice-traffic match access-group 102!!policy-m...

Dear *,I'm reading about Ethernet over Docsis and the L2VPN by Cisco.I'm trying to understand the benefits of it against typical leased lines eg T1.With L2VPN can i configure a Contention Ratio which is attractive to SMB?How can i do it?What services...

Does anyone encountered problem in 12008/GRP with 3GE-GBIC-SC line cards that is not sending netflow data to the netflow collector? We have also a 1 Port Packet Over SONET OC-12c/STM-4c Single Mode that is also configured with netflow that is working...

I am trying to bundle to interfaces from Different Slots one of my router into an ATM IMA bundle. Earlier I had interfaces form a single slot. Could anyone help me in achieving this..regards..Ranjit

I tried to install 12.4(X)T on this chassis to support PA-MC-2T3-EC. "Show fac status" gives me the following:Router#sh facility-alarm staSystem Totals Critical: 1 Major: 0 Minor: 0Source Severity Description [Index]------ ...

hi everyone, I want to analyse the performance of ospf and is-is in ISP network. Can anyone please tell me the model of the network I should consider. Can you please give me a ISP network design. your help will be really appreciated.thank you.

Hello to everyone.One of our SP customers is planning to upgrade their traditional ATM DSLAM to IP DSLAM to enhance customer services and integrate video on ADSL. They need to upgrade their BRAS actually based on ATM interfaces. They don't have that ...

Has anyone used a transparent TCP Proxy solution as a performance enhancement tool (via caching or buffering)?Does Cisco has anything? WAAS looks the closest but it more like a point to point solution (wan acceleration). I am looking after something ...