Routers - Small Business

Hello, have been struggling with getting this to work for almost one week now....Any help is appricated. Problem; even if I configure the IPSec/IKE exactly the same at each end the tunnel doesn`t come up. I have used the following tips/sites, none of...

Hi,I have two offices at two locations, lets' say site A and site B to try and make this simple!  Both are connected to the internet via a broadband fibre connection using 2 x Asus' RT-66U routers.  At office A I have configured the VPN server on the...

RV routers need any licence for VPN connections or load balancing?

Does anyone know how to use this, specifically the "Subject" field, showing "(Hint: C=US, O=Cisco, OU=Hosting Team, CN=RV130)"? There's no mention whatsoever of this entire section SSL Certificate in the Administration Guide, and I can't find any of ...

Hello, I've been struggling to setup my RV320 with Easy VPN, and would appreciate some help. The authentication seems to be OK, as the tunnel is being created correctly, per the logs below.  the problem is with traffic being blocked, what makes me qu...

I keep getting this error on my DHCP request on my packet tracer. DHCP Failed APIPA is being used. here is my configuration for my router and the core switch where I put the IP helperROUTERip dhcp excluded-address 10.0.70.252 10.0.70.254ip dhcp exclu...

hi all.help melan network. cisco RV-042 router greate vlan and nat trunk port.  how to vlan management rv-042 connect to cisco 2960 switch 

Is it necessary to remove the dust from devices. Do some require more special care.If it should be done when should it be done, how often, and what's the best way to do it.Thank you,

I have a 2 RV Series 130 wireless VPN routers connected to each other.  The VPN functions excellently.  However connection to the internet is...odd. On some pages, not all, you will connect and the page will not load just a loading symbol however the...

I currently have 7 locations connected in a mesh topology via Gateway to Gateway VPN Tunnels.All locations can see all other locations without any problems. What I'm trying to achieve is PPTP remote access to the main location that allows that user a...

We bought this router to replace a Netopia router that was acting up.  We truly are a small business so there is no dedicated IT person on our staff and every question I ask the guys that help us on occasion costs upwards of $500 so I'm going to ask ...

I know how to set up protocol binding so that particular traffic (identified by TCP or UDP protocol plus port range) will travel via WAN1 or WAN2.We have WAN1 with a low upload speed (ADSL) and WAN2 with high upload speed (4G modem).I would like to s...