Routers - Small Business

Greetings Gang,Have an RV082 v1.1 FW 1.3.98-tm that has been rock solid for a couple of years and is now, suddenly, experiencing dead crawl DNS resolution.No changes in configuration prior to the behavior starting. Tried rebooting the unit, no change...

Hello, I have UVerse, but I have my home network behind the RV082. I have disabled the firewall on the UVerse gateway for the RV082. On the RV082 I have a pretty simple setup:- DHCP disabled (another server provides DHCP on the home network)- No Fire...

HiI activated the Traffic Meter on my RV180. After one day it showed 2GB traffic although the router not really used yet except for some www traffic. I started to disable devices, creating firewall rules to find the one generating the traffic - no su...

I thought I had a simple setup here, but for some reason my one-to-one nat stops working every few hours.  If I reset the router, or even turn a firewall rule on/off that is enough to make it work again.  By "not working" I mean I am no longer able t...

I have enabled the DNS Proxy under Networking/Lan/IPv4 LAN.The documentation sates:You can also enable a DNS proxy. When enabled, the router then acts as a proxy for all DNS requests and communicates with the ISP's DNS servers. When disabled, all DHC...

we have inserted pvdm3 module in to the 2901 routerbut its LED status is showing Amber continuolsly.I would like configure the FXS card but I am not able to get dial-peer command.Can any ony help?Its sh diag command giving the following output./#sh d...

Please advice what is preventing me to establish a connection with a Cisco RV220W Router-firewall via remote access using an IPsec VPN Client on a laptop (Win 7 / Vista).The Cisco RV220W is behind a NAT ISP Triple Play PPPoE Router. Port Forwarding T...

I'm trying to call into Cisco Tech Support (866) 606-1866 and the call drops after being on hold for 2 minutes every time. Very frustrating!

I saw a post with a response stating that a new RV180W firmware would be released by end of 2013.It was part of the RV220W posts.  I can't find that post but we (community) really need a update that fixes these issues like 100% CPU, selective logging...

Dear support community:We're on a lab setting connecting two Cisco RV320 routers together via their WAN ports. We have one VPN Tunnel up and running, but we're wondering if there's any way you could connect a second VPN tunnel to the same remote LAN ...

Dear support community:We're connecting two RV320 routers on a lab setting. We're able to ping both WAN interfaces, but not the hosts connected to the LAN ports on each of the routers.Both firewalls are down, and both routers are on "Router" working ...

Hello,I have wrvs4400n as a router, firewall and a wireless network access point.As I found possibility to create other WLAN network I would like to set two networks - one for my workers computers where I need access to same VLAN as LAN (currently I ...

HiI bought a RV180 and tried to configure Remote Logging / Email Settings so I can let RV180 send me logs by mail.Although I entered all the settings (mailserver, user, pw etc.) correctly I always get "Test mail delivery failed" when testing the sett...

As the WLAN is not working properly on the RV180w we have disabled WLAN. On the Dashboard it is reported as active with 1 users. This is not correct.Please update the fireware. Thanks!