Routers - Small Business

Hi,one of my client have lease line for internet connectivity,can natting is possible on cisco router RV042.As i have private IP address for internet provided by my vendor.I want to natting the LAN private ip with WAN private ip.for only 20 user inte...

Hi,Here is my weird situation; I have one LAN (managed by a SRP 527w) and within this LAN I have installed a pfSense box that acts as a Captive Portal for a bunch of access points that I have dedicated to guests.The main LAN runs at 192.168.50.xThe p...

Hola. Tengo una consulta ya que soy nuevo en esto de los routersMe dieron un Router Cisco RV016 y necesito configurarlo y no puedo.Tengo proveedor de Internet Arnet, Usuario, Contraseñia y dos DNS del mismo proveedor, Les cuento lo que hice:Ingreso a...

                   Hi all,Just installed this brand new router in replacement of a bewan secure lx200h.I'm pretty satisfied with VPN stability, VPN Backup feature is easy, even without any user manual ...I didn't find how to make a load balanced VPN ...

Hi ppl, today I got my RV180W - I wanted to update the firmware from 1.0.0.30 to 1.0.1.9 or 1.0.2.6 - but both don't work. It seems like the router does the upgrade but after the restart I still have 1.0.0.30 on the router...And I have another questi...

Hello.I recently bought Cisco RV120W and I have some problems with firmware. I set up router in "router" mode and wan't to configure some static routes. And there's first problem. GUI doesn't let me insert IP of my company's default gateway which is ...

Alright, I have a pretty basic question I have been scratching my head over.I am having ongoing issues with my ISP over extreme latency, and wildly varying bandwidth values. I have DSL modem in bridge mode, connected to a Cisco RV180 router with a st...

I am having issue accessing files over VPN ipsec tunnel.  This is mostly new to me due to never having to use VPN before and looking for some help/guidence.I have two offices Office A uses 192.168.1.1, Office B uses 192.168.2.1 both subnets are 255.2...

I would like to segment 2 parts of my network into separate VLANs (Main & Guest - VLAN 1 & 2, Same Subnet) Right now they are both isolated from each other but I would like VLAN1 (Main) to be able to see VLAN2 (Guest), but not the other way around.Ca...

We have a RV082 that we're using soley for routing and no other services (firewall is disabled). For some reason you can query a DNS server on it even though we have never set a DNS server address for it to use. I'm guessing that it has some hard-cod...

Can anyone provide me a link to the manual for the RV320?I've found manuals for a number of the other RV routers, but can't find the RV320.Thanks.

One of our customers is trying to get a Pantech UML295 USB 4G modem working, but the SRP541W does not recognize the Pantech UML295 USB 4G modem. Is the Pantech UML295 USB 4G modem going to be supported in a future version of the SRP541W firmware? The...

I am replacing an RV082 rev 2 with a RV082 rev 3.I have flashed the RV082 with the latest firmware rev 4.2.2.08.We built the configuration from scratch, but I am having a problem with Advanced Routing The RV082 is on ip address 192.168.5.254When we c...

Hello,I have a problem with a Cisco small business routeur SRP527W, firmware version: 1.01.29 (002).I have two vlan. Vlan 1 (with SSID 1 and port 1 and 2 attached to) is for my client A.Vlan 2 (with SSID 2 and port 3 and 4 attached to) is for my clie...

I have SSHed into a new voice router (2911) and hit the TERM MON command as well as a DEBUG ISDN command yet I do not see any terminal messages or debug messages. LOGGING EVENTS level is at 7. What am I missing here.Sorry for the rookie questionDavid