Routers - Small Business

After fighting a brand new RV220W for hours I am just about giving up on it.It does not forward anything the to the DMZ server including the IP protocol 41 packets needed for our IPv6 6in4 tunnel.Nor does it send protocol 41 packets to the WAN.TCP an...

I have upgraded this device to Firmware Version: V2.0.2.7 (yes its a v2)As far as I can see it is missing a critical function; I can not put a tagged VLAN on the wan interface. I intended to use this in router mode with a static wan and all firewalli...

HII have a big problem, I cannot connect via VPN PPTP (normal setup in windows xp), I have managed to connect over VPN direct connected to internet, through the router (WRVS4400n) if I turn off the firewall. But I cannot connect with the firewall ena...

Hi,I have just bought a new Cisco Rv1200w router, which is running the very latest firmware V1.0.2.6. My problem is that since swapping my router, my HP server can no longer see the default gateway (now the cisco), however it can see anything else on...

HiI would like to know how can I set up wake on wan trough port forwarding. How can I point to broadcast ip 192.168.1.255 with port 9Please help

I downloaded the latest firware upgrade and installed it.  It appeard to complete and the router rebooted and my network is appearing to run fine.  I just cant login to the router.  I tried the default admin admin and my changed PW and neither is con...

Hi all,I've recently bought a RV042 wich is great as i've got 2 Internet Connections..The first Internet access is as below:(WAN-1@)ZYXEL P642 ADSL 2+Lan IP: 192.168.0.254Mask: 255.255.255.0The second Internet access is as below:(WAN-2@)CLEAR WIMAXLa...

Hi Techies,Pardon me because I am just new to Cisco. Is it possible to configure RDP on SA520 Router? I did try once but no luck. Here my configuration:My objective to login to a server on a local network on VLAN 10 via RDP at home connecting to this...

Cisco,Just downloaded this firmware from your site, and it appears to be corrupt....I am noticing that the saved file size appears to be smaller than previous versions.Can you please double check and make sure the file being downloaded from your site...

HiHave system time issues with rv220w!Setup:Note that the real time is 17.32 (bottom right) but the system time is 16.20, result 1h offset (sad that the possibility to configure summertime start/end is missing)Setting up the WiFi active time from 5.3...

We have a small VPN setup with Netgear ProSafe FVS338 wired firewall appliances.  We  now want to add a wireless access for a few laptops on one of these  FVS338.  Someone suggested that we connect a Netgear N600 dual range router to the FVS338 for o...

Can someone explain how the RV042 decides what to send via syslog? I've just installed a new RV042 (v3) with f/w updated to 4.0.3.03-tm. I added some UPnP forwards for remote access, as well as PPTP forwarding, and I want to log all failed and succes...

I just got a WRV 210 wireless router (three of them actually, planning to set up a VPN). But I can't set the admin password. I've tried 4 times, and every time, i'm forced to hold the reset button to reset to factory settings in order to access the m...