Buy or Renew
Buy or Renew

Routing

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
Labels

Forum Posts

Start a conversation

Resolved! track num rtr missing

Hello guys,I have a switch WS-C3560G-48TS.The version of IOS is:WS-C3560G-48TS     12.2(58)SE2           C3560-IPSERVICESK9-MThe command "track number rtr" is missing. There are just three options there:#track 10 ?  interface  Select an interface to ...

cisco bgp failover issue

Hi,Headoffice:In my headoffice there are two cisco routers.one router is connected with bsnl mpls link and another router is connected with Tata mpls link.In bsnl 3845 router Gig0/0 is configured as local Lan 10.10.30.100/22 and Gig0/1 as MPLS link(8...

QOS issue on 6500

Hi All,I am trying to convert QOS policy on 6500 CAT to IOS as below,1-getting error when try to apply on  interface.2-How can I apply both into one plicy map because IOS convertor puts into two policy maps.Please can any one check and advise any alt...

Resolved! help me understand router performance

Please see the report from Cisco.http://www.cisco.com/web/partners/downloads/765/tools/quickreference/routerperformance.pdfThis says an ISR G2 3945 can achieve 502.78 Mbits when CEF fast switching. Is this per port or total for the whole box? Since ...

Resolved! 857 Int. Service Router - Annex-M

HiI'm trying to establish if the Cisco 857 can support annex-m to improve upstream speeds, I'm aware I may need to change the ADSL firmware to do this but I cannot find any information if the router suports Annex-M.Does anyone have any experience of ...

Overlapping IP and/or subnet

Hi,I have this weird scenario whereby my customer wanted 3 VLANs and each VLANs should have the same IP.PC1 (192.168.1.2/24) in VLAN1.PC2 (192.168.1.2/24) in VLAN2.PC3 (192.168.1.2/24) in VLAN3.Is that even possible?

1941W Routing and NAT question , any ideas?

All,First off, I have been using Cisco IOS routers for many years.  I have a 1941W that is giving me fits.  I have a simple configuration with Gig0/0 being the WAN link and Gig0/1 being the LAN link.  (Don't get me started on the AP.....I may buy a L...

dbrockma by • Cisco Employee
  • 745 Views
  • 3 replies
  • 0 Helpful votes

Connecting a Cisco Switch to a Live Network

Hi EveryoneIm planning to add a cisco switch to my network. A friend of mind told me to be on my guard (lol) because he had once done this before and the network was down.Does this really happen? If yes why? And what precautions should i take before ...

NAT in 2650s

Hello all, I have the following configs for NAT in a Cisco2650XM:ip nat inside source route-map nonat interface Serial0/0 overloadroute-map nonat permit 10 match ip address nonatip access-list extended nonatpermit 192.168.85.0 0.0.0.255 anyinterface ...

mukundh86 by • Level 1
  • 1166 Views
  • 8 replies
  • 0 Helpful votes

switch killing connection to router

I'm working on my cisco lab.  Every device is plugged in to my switch (computer, router, firewall).  Whenever I telnet from my computer direct to my router, it works for a second and then disconnects.  I cant then reconnect.  If I telnet to my switch...

887, DMT Bits Per Bin not working on ADSL2+

I used to have a 877w in the same place and same setup as my current 887, this time though the DMT Bits Per Bin just will not populate on ADSL2+ altough it did work when it sync ADSL1 (same line/DSLAM, just came up ADSL for some reason).Any Ideas? It...

Resolved! Remote DHCP/DNS routing config

Hi guys,i am hoping if anyone can reply to my query below.We have got a new batch of servers and they reside on a separate VLAN 192.168.45.x 255.255.255.0Those servers are required to be registered on the DNS/DHCP server located on the remote site (S...

Resolved! Issue with routing?!? I know I'm missing something.

Hi everyone.I've set up home lab. I have two routers 1721, 1 switch 2950, PC and 2 laptops.=================================================================================================My two routers are connected via serial interface. R2 is direc...

osatronix by • Level 1
  • 9305 Views
  • 38 replies
  • 0 Helpful votes

Copy flash TFTP Error

I have a 3550 switch that I am trying to upgrade the IOS on.I am trying to copy to a TFTP server.I am receiving a socket error.I saw that this can be fixed withSwitch#config tEnter configuration commands, one per line.  End with CNTL/Z.Switch(config)...

Resolved! access server

I have a 2511 router as an acces server.  When I connect to any host it says connection refused or I get half of the 2511 banner and then freezes.  If I turn the switch or router off then back on it I can see it fine but eventually they disconnect an...

Load more