HiI`m panning several VRFs trough my network.The "routers" is Cisco 3750s.Do I have to create linknets and route each VRF trough the network, or is there a better way to do this?
HiI got following the IPSec tunnel fluctuating between status of UP-Active to UP-NO-IKE and VPN drops.In the logs I see following :RECVD_PKT_INV_SPI: decaps: rec'd IPSEC packet has invalid spi for destaddr=2xx.xx.x.x, prot=50, spi=0x80AA1F1E(21586327...
HelloThere're more than twenty 6509VE running in the network. All of them has got 1GE or 10GE SFP / GBIC.However, when I tried "show int trans" in some of them, there's nothing shown:Router_A#sh int transceivNo transceiver presentRouter_A#sh invRout...
Hi,I'm unable to apply service-policy in interface tunnel. The error return GTS not supported. Please help to guide me thanks.policy-map QOS-PBS-512K description Egress traffic Branch Link To PBS 512 K class class-default shape average 460000 serv...
Dear Cisco Team,I make qos on VPN Tunnel, but i make command service-policy output name, it show the error belowTraffic Shaping feature is not supported in user defined class of parent level policyMy cisco router 1921, IOS : c1900-universalk9-mz.SPA....
Can someone post a sample config for a similiar router and switch module configuration? I am really interested in the router int ports addressing in relation to switch module and the proper configuration.
I have a Cisco2911 with a 16 port switch module. I want to pass multicast from ports on the switch through the router to outside networks.What ios and configuration do i need to allow this to happen? I can pass multicast on the switch itself betwee...
Hi All,I was wondering if it is possible to configure a static default route pointing towards an aggregate...I was thinking about this as a solution on a CE POP router.ip route 0.0.0.0 0.0.0.0 x.x.0.0x.x.0.0 = network aggregate close to the NAP Thank...
Hello guys , i have two cisco 2800 routers , and i have three differnet networks , so can cisco routers supports more than one private network exampleMy First localation i have one public connection of 200.100.100. 1 and private network of 192.168.1...
Hi Everybody,I am trying to use the apple finder/application to view all my apple mac-mini computers. I do have two asdm-5505 connected via a vpn tunnel.At this point I can view only the computers on the local subnets. I called AppleCare and they ga...
Hi Experts,I need to implement the following scenarion in one of my clients.I am having so much regarding this please helpMy needs are1) Configure the attched scenario2) Internet must be up and running3) Make the servers publically available (NAT)4) ...
As above. Had a ISP replace their equipment at our site and we lost connectivity they put the old equipment back and we still had no connectivity. A reboot of the router restored connectivity through the T1.Thanks in advance.
I have a 2610 router. How can I tell if the built-in ethernet port is only a 10BASE-T or if it's a 10/100 port? If it's only 10BASE-T, can I upgrade it to 10/100?Thanks,Gregg206-795-0597
Hi, i am currently trying to configure a four port ISDN BRI interface on a Cisco 2811 router.Upon upgrading to a later version of IOS, c2800nm-advipservicesk9-mz.124-25d.bin, access to the HWIC-4B-S/T module is lost, the router no longer detects it. ...
Hi all,I have total five routersHQ, SB, SCFRPSTNHQ Router is physicall connected to FR through Serial Cables (Note: HQ is connected to SB & SC through FR, there is no ip address configured on serial interfaces of FR Router).FR Router is connected to ...
