Routing

I am trying to use MLPPP to bond two T1's between a 1700 series and a 3600 series. I can't get the T1 to come up, I've tried HDLC and PPP independently and can only get the interface up and up when i put a hard loopback on either end, they will loopb...

Hi,I have a Cisco 1802 to connect my company to ADSL over ISDN. But my boss wants to change the ISP. The propose was (still is) to configure de router with VPN, IPS and use the WAN port to connect the new ISP, that provides an Ethernet signal to 100M...

Hi Guys,We are setting up a new peering session with a provider for pppoe services - They will be advertising there LAC's to us, and have suggested we do the following:- Only Accept a /32 advertised prefix- Only accept a maximum of 500 prefixes- Only...

Hi,is there any way to check how much of the total buffer size is utlized at any given moment out of the total space or memory allocated in Cisco 4500 switchFor eg -  show logging output is as below for a 4500 switchSyslog logging: enabled (0 message...

Hi matesI have got  problem with my branch router  which is sending excessive netbios icmp request to ghost ipI have monitored it with wireshark  for two days and  it peridically sending  icmp request to     ghost ip that doesn't exist in my topolgyc...

Hello,Please see attached BGP confederation configuration and Topology. They are taken from "Routing TCP/IP Volume 2" book.AS 65000 is designed as a backbone AS connected to non-backbone AS 65535, 65534 and 65533. All are member AS's in AS 1200.I hav...

Hi i have cisco sr520 adsl router. I have configured two vlans i need in vlan 2 speed only 2 Mbit/s from 6Mbit/s (full speed). Any idea thanks for the reply.Sent from Cisco Technical Support iPhone App

Hi all,i'm wonderring about one point without finding any answer to my question. Is class order important in policy map definition ? I know it's important regarding match criteria, but is order important for a kind of priority.I explainI have a 1gig ...

Hi IOS Users,I am having big problems trying to get what should be a rather simple configuration to work.I have a Cisco 2901 Router and have setup Zone Based Firewall on this.The machine has:1 x EHWIC-4ESG1 x HWIC-ADSL-M1 x HWIC-2FEI have configured ...