Routing

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

I have two VRF. The first-one connected to Internet, the second-one to an inside LAN with private ip and NAT.All works but, if I take away the green line, dns resolution doesn't work, every else is ok (tcp, ssh, icmp...). So I need to have two defaul...

I have attached my network diagram in a pdf.My ASA is configured with two outside interfacesOne to each ISP.Each ISP router is getting a default route from provider.I am currently using HSRP between the two routers on the inside interface on BVI inte...

trippi by Level 1
  • 849 Views
  • 1 replies
  • 0 Helpful votes

I have an Edge router which has a PIM SM domainon the LAN interface and PIM BIDIR on teh WAN interface.I need to be able to pass the multicast packets from one domain to the other.Is there any way to do that?

jschweng by Level 1
  • 617 Views
  • 1 replies
  • 0 Helpful votes

Hi Experts!How do I get this workingLocation_A needs to be connected to Location_B over E1.Location_A terminate P1 / P2 / P3 / P4Location_B will soon terminate P11 / P12 / P13Location_A should have reachability to P11 / P12 / P13Location_B should hav...

melwin.uk by Level 1
  • 465 Views
  • 2 replies
  • 0 Helpful votes

I have a network in a remote location connected via BGP.  There normal network traffic is working fine but I can't get internet traffic to respond over the bgp network.I was trying to traceroute an internet site with no luck.  After reading, I've add...

catahoula by Level 1
  • 1417 Views
  • 2 replies
  • 0 Helpful votes

We have an OC-12 circuit (622Mbps) connected to our router's gigE interface (inter g1/0). Although the physocal interface is 1000Mbps the actual line speed is 622Mbps. If I get an offer load of 1 gig of data going through the interface, only 622Mb wi...

Hi,we have a Cisco 6500 switch with FWSM module. we changed the VLAN names on the switch, the FWSM and the access switches. we also changed the security levels on the FWSM for the user access VLANs. the cahnges done were just to put users VLANs on th...

Hi Folks,Actually I got a web server inside of my network, I got a 1760 router with 2 ADSL connection. The web is reachable from internet through the router's public ip address that we rent from the ISP (We got a public domain name too with this IP)....

Hi folks,Someone claimed that is possible to summarize the networks listed below in (4) aggregate-address statements (to be advertised via BGP and also to be placed in prefix-lists). I tried to do that and I do not see how. In my view, Option 2) is t...

news2010a by Level 3
  • 806 Views
  • 3 replies
  • 0 Helpful votes