Routing

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Webinar

 
Labels

Forum Posts

Hi Friends,I am facing packet Loss problem with MGX to MGX connectivity. I have an IMA PNNI link between two MGX. I also have a UNI connection to two routers. the connection diagram is provided below.Router1 <-> MGX <-> MGX <-> Router2when i ping fro...

I have a CISCO 1841 router with a serial card connected to a diginet line and a ethernet connected to my switch all configured and working fine. My question is the following.I  have a Netgear ADSL device also connected to my switch which is used for ...

Hi,I have trouble setting up a cisco 2811 as a terminal server using HWIC16A card and an octal cable.The problem is that for some lines it works, and for some it does not even though they are setup the same.When I do show line this is the output:Rout...

kasper123 by Level 4
  • 5223 Views
  • 3 replies
  • 0 Helpful votes

in our company.when we update cisco 7507 to cisco 7606. and ATM port update PA-A3-OC3SMI to PA-A6-OC3SMI. but now,the CRC of the ATM port increase,the counters is almost 60~70 for running 4days.WHY?

QFX527518 by Level 1
  • 504 Views
  • 1 replies
  • 0 Helpful votes

now,on the cisco 7606 router ,only few traffic's tos,not like cisco 7507, by show ip cache verbose flow,can see all the traffic's tos.how command can see all traffic's tos on cisco 7606.================================================================...

QFX527518 by Level 1
  • 709 Views
  • 2 replies
  • 0 Helpful votes

So we have a Cisco infrastructure. We have Cisco 2800 Series at our main building - "call it main building" - and Cicso 3560 PoE switch. Another site - call it "site B" - is the same with 2800 router and 3560 switch. At site B, users would report los...

jrebellon by Level 1
  • 1675 Views
  • 6 replies
  • 0 Helpful votes

I have the following config on a Cisco 877, and am having problems sending large packets when NAT is enabled - I have tried disabling ip virtual-reassembly, but it does not resolve the problem(And show ip virtual-reass does not report any dropped fra...

Hello everyone,I have a 3640 router with 4 fastethernet interfaces:fa1/0 is my LAN facing, inside natfa2/0 is my main WAN / ISP connection to AT&T, outside nat, connects to a 2821fa3/0 is my second WAN / ISP connection to Comcast Business, outside na...

mnleblanc by Level 1
  • 4170 Views
  • 4 replies
  • 0 Helpful votes

Could you please tell me, will this modules work with 7206 NPE-G2 or not? Because in this documenthttp://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.htmlI don't see this modules in capability list for ...

rsaltykov by Level 1
  • 1547 Views
  • 4 replies
  • 0 Helpful votes

My boss has asked me to find a replacement Cisco Switch,We are currently using a SMC tigerswitch smc6128pl2 What would be the approprate replacement for this switch in a cisco model?  Any suggestions would be greatly appreciated.many thanks in advanc...

csbright1 by Level 1
  • 536 Views
  • 2 replies
  • 0 Helpful votes

Hi I have a system that involves two devices plugged into a cisco asa 5540 firewall.  A program on the device on the inside sends traffic to the device on the outside at a specific ip address 192.168.11.11 for instance.  Is there a way that I can red...

bwhite123 by Level 1
  • 924 Views
  • 4 replies
  • 0 Helpful votes
Review Cisco Networking for a $25 gift card