Routing

Hello,I have the following commands configured on my cisco2821 G0/0 interface:int g0/0ip adddress x.x.x.x x.x.x.xip helper-address 172.24.1.1ip helper-address 172.24.1.2speed 1000duplex fullno shut!Can I know how will this ip helper work? Will it alw...

Our 1721 redistributes into our 10.25.x.x WAN via RIP several static routes to hosts in an external 10.15.x.x network. However, there's another host in 10.15 that I need to access via a different gateway on another subnet that's directly connected to...

Dear team,               Iam getting continous alarma in my SONET links from my 7606 router.Jan  2 13:04:23.637: %SONET-4-ALARM:  POS3/2/0: B3-TCA declaredJan  2 13:04:33.645: %SONET-4-ALARM:  POS3/2/0: B3-TCA clearedJan  2 13:16:22.637: %SONET-4-ALA...

Question is how much bandwidth should we see with a 2811 and an IMA bundle pack (AIM-IMA and 2 dual port VWIC-2MFT-T1.  We are utilizing 3 t-1's in this scenario, so one should expect a 4.5 by 4.5.  But I though I read that the 2811 could only handle...

I am having a problem routing ip traffic with port numbers from one LAN to another. I have two networks 192.168 and 10.100.  I can successfully connect to devices from the 192 network to the 10 network and from the 10 network to the 192 network.  I a...

We are using a 836 router for connecting to the Internet via PPoE.I recently introduced in our LAN a Vista workstation. The user of this workstation cannot download large files e.g. from Yoursendit service.I switched the cisco router to the lousy fre...

Hi,We have three routers connected by serial link back to back. Router_A-->Router_B--->Router_C.Each router has fastethernet enabled. All routers are in same AS. We have BGP relationship established between Router_A and Router_Band Router_B and Route...

hello friends,i attended some technical interveiws and everytime i faced one question that why to use BGP when we have good protocols like OSPF or EIGRP?really guys, i used to give answers but from my side i never satisfy with exact answer and also i...

hi All,We have observed below logs on one of our customers.dsxpnm_gt96k_abort_rx_mpsc:Aborting Rx mpsc faileddsxpnm_gt96k_abort_rx_mpsc:Aborting Rx mpsc faileddsxpnm_gt96k_abort_rx_mpsc:Aborting Rx mpsc faileddsxpnm_gt96k_abort_rx_mpsc:Aborting Rx mp...

Hi, I have a one "white" IP: XX.XX.XX.74, gatweway XX.XX.XX.73, mask - 252,and adittionaly 16 "white" IP XX.XX.XX.80/28 routing in provider on my IP (.74).I Setup my WRV200 as:"WAN side" Static IP: XX.XX.XX.74         gatweway:  XX.XX.XX.73  mask  - ...

HelloI have a customer needs continues  internet connection just for browsing issue coz its important to him(in the past his ISP goes down for 6 hours,so it was panic to him that moment coz he lost a lot of money in the stock exchange), along with ex...

Dear Experts,I expect your help by giving clue how to achieve the traffic as described below: (Also find the attached Diagram)It is a Hub & Spoke topology. Branch office-1 is able to communicate with Branch office -2 thru Hub Router. Now I want to ch...

Hi All,          I have a problem with Router 1841 on software version 12.4(13r) T, After reboot system I cannot access to CLI.The attached file is capture screen during turn on my device.Thank you.