Routing

We have 64MB flash and want to upgrade to 128MB.What is the best way to copy all the files in the flash to the new one?I have flash card reader, but I use "copy flash:xxx tftp:" to my PC, and copy the file to my flash card reader.Then I plug the flas...

Hello BGP Gurus,I have client with 2 ISPs/Dual routers. ISP-A :10Meg & ISP-B : T1Local public AS advertised to ISPA & ISPB (with ISP-B : via AS-Prepend). Traffic still using ISP-Bfor coming into Network. This is understandable -as the AS-prepend wi...

Hi,We have two 7200 routes with 155m each b/w running primary/backup module.We like to utilize all the 310m b/w.We are running BGP peering with our service provider.1-If we runn BGP load balancing on our WAN routers , will we face any asymetrical is...

Hi AllWhy am I recieving packets input, but last input shows 1w2d ? GigabitEthernet2/0/15 is up, line protocol is up (connected) Hardware is Gigabit Ethernet, address is 0018.73e3.a10f (bia 0018.73e3.a10f) Description: link to btw MTU 1500 bytes, ...

Please, How can I configure Frame-Relay over Ethernet?thanks,

Hi,can you please help me to configure dual ADSL line on cisco 2811 router to do WAN load balencing.here i dont have any Static IP form both ISP ,ADSL over PPOA (dynamic)Thanks & regardsPraju

We have a DS3 to our DR site. We have replication traffic and normal DR traffic on this link.We will be adding a second DS3 and want to dedicate one for the replication traffic and the other for normal DR traffic.Is it possible to have one link prefe...

Hi,The switches logs in one of our switch is filled with SNMP request from couple of servers and looks like the following - 008391: Apr 30 14:36:38.167: %SNMP-3-AUTHFAIL: Authentication failure for SNMP req from host 164.112.148.222008392: Apr 30 14:...

Hello All:I there any current IOS that will support 4-byte AS.If there is could some one tell me the version ?Is there any document on this if something is going on to support this by cisco.Thanks in advance

Hi,Now, BRI troubleshooting.please technical advices me that look attached file about debug isdn status.following message is isdn status log.ISDN status:#sh controllers bri BRI unit 0:layer 1 operating in LT-T mode.Layer 1 is PENDING ACTIVATION. (ISD...

hai I am working for an ISP so that i have put a 2 MB link to the customer router . since the customer is having video traffic i had pu t some policies in the customer end router .i had given precedence value 4 for the video traffic and remaining i...

I want to configure the RouterA to make all traffics go to 1.1.1.1/24 will eventually pass through the RouterB to reach the subnet. Between RouterA and RouterB, there are multiple hops, which are all out of my control. Am I able to do it?

Hi friends,I am looking for a 2800 router working as a Terminal server or console server.I need console connections to 4 Cisco devices from the terminal server and the terminal server also needs to have the capability to dial in.I am not clear about ...