Routing

Hi netpros, Can i have commands steps for IOS upgradation in 3725 series router.after upload new image , i need to shut the old image and want new image to load , what is the commands and steps?thanks in advance

Hello!, I'm forming a GRE to handle IPXinto VPN. My interface serial 2 is connected to V.35 cable and the other point is db60 and it is connected to modem.My server requires other applications from my local network. My gre configuration is:int tunnel...

Currently, when I look at the module, it list all of the controllers as T-1. I cannot change any of the ports to an E1.I believe however you set up the card initially then that is the standard it will support. Is there a way to turn up a E-1 between ...

Hi,As my practical knowledge of MPLS is very limited I would like to ask a question regarding MPLS network design and Cisco appliances. First let me explain the requirements. A prospective client wants to build a MPLS network in order to connect 10-1...

Hi,Does anyone know how i can find out which IOS version support 32 bit ASN's. I have tried the software tool on the site but no joy yet.ThanksPD

I have many remote 2811 routers. Sometime after a power outage, they will lose BGP connection to ISP.These are my findings.a. the show ip inter brief showed atm 0/0/0 was up/up.b. router is not able to ping ISP router.The BGP router is no longer on ...

When a server starts sending the file, i see a random port being used. Now how are we supposed to write a proper ACL for this...accept everything from the host? Modify the tftp server source code?Please help.

hi! I'm connecting a L3 3550sw to a L2 29xx sw, and 2 routers are connected to the 29xx sw. I'm doing some testing on routing between a L3 switch with the routers, but i'm not able to propagate the routing table between the L3 switch and the routers....

I've a task to develop topology for one central and multiple regions sites. The main task is to minimize DS0 timeslots, so I'm going to use hardware compression (taking into consideration that there would be 99% text-only not-compressed data through ...

My company is channing our T1 circuit from broadwing to Verizon.. does anyone know the proper test performing this and the validation process

Hi Sir,I'm looking for a Cisco 800 Series router with one low-speed serial interface to support X.25. As far as I know, the only model is Cisco 805, which is already EOS.Please clarify.Thank you.B.Rgds,Lim TS

I'm reading through the CCNP BSCI official Prep Guide (Latest Version) and it states that the type 4 LSA is produced by the ASBR. The CCNP BSCI Exam Cert Guide (Self-Study 3rd edition) states that the type 4 LSA is sent from the ABR to the ASBR. So w...

Dear All,I am looking forward to split a prefix for downlink traffic. Let me just put my thoughts in more specific case.1. Running eBGP with 3-ISPs (Multihoming).2. Advertised 192.168.0.0/22 on three ISPs as per PBR.Requirement:1. I want to force the...

Hi,I have taken an MPLS connectivity between two offices and would like to deploy backup Leased Line connectivity through other ISP.I have configured static route for both the links. MPLS with High priority and Leased Line with slightly lower value...