Routing

Textbooks like to go through the steps of what happens to a packet as it goes from client to server through a single router. This always makes sense...The client application payload gets handed down the TCP/IP stack to layer 3, layer 2, etc., then b...

Here are the requirements...Router require the ability to terminate and map 200 VLANs to MPLS LSP- This router will require the ability to receive and table up to 10,000 routes learned via RIP- The router will require the ability to...

hello,I am confuse between two different terms of MPLS VPN RD and RT. What is the difference between both and where they are used?will someone please clear this with some good example?

Hello All,I have a query regarding the tail drop behavior when using WRED in conjunction with CBWFQ.What happens when traffic for any of the precedence queue exceed the max-threshold?Does the excess packets spill over to class-default or tail-drop re...

Hi Sir,I'm configuring a router which is in the boundary of EIGRP and OSPF. Interface Fas0/0 should be EIGRP network and Se0/0 should be OSPF network.!int fas 0/0 desc *** EIGRP Network *** ip address 150.50.1.1 255.255.255.0!int s 0/0 desc *** OSPF ...

I have a quick question to ask I have a point to point connection that is experiencing slowness and about 40% packet loss. I've openned up the access-list and took off the NATTing going from me to the client. The only NATTing is from the client to u...

Hi,does anybody know the recommended parameters for G.SHDSL link? I have two routers 878 connected back-to-back using G.SHDSL, but the connection is failed. The parameters of this link are following:Resist. - 61,5 OHMLength - 282,4 mDelay - 1233 nsIm...

When I access my PIX remotely or from the LAN it will drop the connection about 10 mins into configuring anything, even if I'm using the interface and monitoring. I then have to shut off my browser, wait a few minutes, then connect again. This is hap...

Hi,Can anyone give me a white papaer on Wide area application Services(WAAS).

Just wondering if any one can clarify if the upgrade we are planning to do on our 1760 router to Cisco 1700 Advanced Security Feature Pack has support for ADSL over ISDN, from the Feature Navigator, it doesn't, however has for ADSL over PSTN.Regards

We currently have a network setup that consists of a 1700 series router connected to a 501 pix and then a 48 port switch.The input to the router from the outside world is a fiber that simply passes thru a switch to convert it from fiber to ethernet.T...

Hi I want to monitor igx using any any monitoring tool. Can someone suggest or provide me any monitoring tool. I have Solarwinds but i think MIB is not compatible with igxRegardsOm