Routing

IN MY NETWORK WHICH WAS WORKING FOR A LONG TIME HAS SUDDENLY A PROBLEM WHICH IS THE FAST ETHERNET PORT GOES DOWN AND AFTER A WHILE IT GOES UP AND SO ON, I DECIDED TO CHANGE THE ROUTER, THE SAME THING HAPPEN IN MY NETWORK, COULD YOU HELP?

HiWhich one its ideal to the distribution Switch(catalyst 3500 Family)?& wich one ideal for the Access switch(2950 Family)?.the ideal switchs must support GIBIC Port fiber..10xsAli

Hi,I am implementing Reliable Static Routing Backup Using Object Tracking...., but one thing is confusing me i.e. SAA ( Service Assurance Agents ) where are they used do i've to implement both...., any help or example regarding both of these will b h...

Hello,I have read articles to configure CBWFQ inside GTS, using bandwidth percent on the CBWFQ side, then putting that policy into a GTS 'shape average' policy.I want to do exactly that, but need LLQ for voice - so use the 'priority 64' for voice, th...

When the line S0/1/0:0 goes down, when it comes up the interface s01/0:0 requires shut and no shut to resume.Please find the encloesd sh controller e1 0/1/0 output:

Hi I'm looking to find a configuration template on a standard Cisco 1700 router. I have a customer that has a 2Mbs ethernet service and would like the option to have a ADSL as backup. Is there a configuration that i can look at to see how it will be ...

Have remote offices setup with Cisco 2600 router on serial frame-relay and an ISDN backup.Is there a way to test the ISDN backup interface/circuit without taking the serial interface down?I'd like to verify that the ISDN is indeed available before ac...

Dear Concerned,We are trying to create the following environment for one of our clients.There are 3 branches (with LAN) in the scenario; • Head Office• Branch Office A and • Branch Office BThe Head Office and Branch office A is connected through ISP ...

command to use the tftp server ios image for booting the router

We have a cisco 1721 router with one one WIC-1T. We are using this router to use 2Mb internet leased line. Its working good. Now we have increased our bandwidth from 2Mb to 4Mb. I have listend that this Serial card support only 2Mb maximum. So please...

Sir,I want to connect my networks through AS numbers and i want that when my one network's down it'll automatically jumps to the other one, these days working statically, plz guide me about this.Thanx alot,Ahmad Manzoor