Routing

I am turning up a new wan on the ATM protocol. And with my current setup I can not ping the ATM interface on the router. Can anyone tell me what I am missing? HELPGenenetwork-clock-participate aim 0network-clock-select 1 T1 0/0/0network-clock-select...

I have two locations connected together using PA-T3+ cards with subscription of clear channel DS3 line.There are three types of framing available for PA-T3+ adapter - C-Bit, M13 & Bypass. Given that if we are using the line for point to point IP data...

hi all,i have the followinig in my router, i only want the web and the cisco vpn to work. when i apply these, it stops so apparently i am doing somethign wrong! can someone help? thanks!!access-list 2 remark <name>access-list 2 permit <ip> 0.0.0.2...

HiI am trying to establish a PPPoE connection using a 2811 and accompanying 16 port etherswitch module (i.e. plug a dsl modem in bridged mode into one of the etherswitch ports and get the router to establish the PPPoE connection) - would anyone know ...

hi all,i have doubt related how to configure the rate-limit.my doubt is related to normal burts and excess burts. in rate limit do we need to specify bits ,or convert them into bytes and them specify. example i have to limit ftp with speed of 1mb (1...

i have bit confused can some one plz help me out:suppose we have 3 routers which r located in three different sites (melbourne, hongkong, uk) i have dedicated link between them with class c ips.......and running ospf on them.now te...

Please any one tell me which routing protocol is most reliable protocol, and in which type of network we uses which routing protocolthax

We have 3825 router (vestion 124-5a) which has 2 connections to our ISP. The primary link has static route to y.y.y.y (ISP's DG) and "IP SLA" is monitoring this route with these commands.Please see the related configs below. ip sla monitor 1 type ...

Hello,I would appreciate if someone could validate my observations on how Internal routers choose summary LSAs heard from two ABRs.It seems as though if an Internal router is directly attached to the ABRs it will use both LSAs. (also assuming metric ...

Guys, I would like to setup basic VPN tunnel between a router and other pixfirewal, what should I keep in concern? also could any body show me sample config that shoud be done on Pix? thanks,

Hi,If a customer is having two uplinks & 2 downlinks, totally based on static routes, now the cust wants to peer with that ISP using BGP, now can he use MED to steer traffic-typeA through one downlink & Traffic-typeB through 2nd downlink & how to dis...