Routing

I make show logging. I see following messageOct 24 11:18:57 MSK: %SEC-6-IPACCESSLOGP: list 105 denied udp 83.136.245.74(137) (FastEthernet0/0.200 000e.a6a2.572f) -> 192.168.1.50(137), 5 packets FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF 002D 0104 7AFC 0...

Can somebody clear me of below matter: - If my Router Link has capacity of 64Kbps, and traffic input to router is less than the output capacity, then will there be any packets waiting in the outputs queue of the interface to get out. Also based on ab...

I have an 857 router that I am trying to install on a customer premises. I am using all the correct settings as given by BT but when I test the ADSL connection the error message is that 'a cable is unplugged or faulty' When I do the exact same set-up...

hi alli want to learn some concepts abt IPV6can anybody post a link related to this.it should be from the scratch.Best regdsBinoy

Hi, Have this weird problem where by if type show run/config one of the ospf-id is missing but the rest of ospf config under this is processor OK. If do sh ip ospf "id" it's there. Is this a bug?I have three ospf-proc’s 10, 20 and 30. The one that is...

Can anybody explain me the function of the port 7 (echo)?What is it and how is it used?Thanks to read

When we talk about router implemented “protocols” (eg HDLC, PPP ) are we talking about hard code embedded into the router IC’s, which, when instructed by IOS coding, performs a specific task on data ( ie HDLC or PPP data encapsulation). Or is it part...

apologies if this is a reallly basic question (and it's one I definitely should know but seem to be having a mental block on!).If I have a 2600-series router with an ADSL WIC and I want a reliable failover/backup service for TCP-based alerts (mostly ...

HiI have a problem with GRE configuration. between router A and B there is 1 more router. all 3 router area under same ospf domain. after configure as belows, tunnel interface is keep flapping with error message "routing loop ...". can i fix this pro...

One of our cisco 7206VXR (NPE-G1) processor with ATM interface for DSL clients as route-bridged type is currently experiencing a High CPU utilization with 99%. From the cpu processes, we noticed a high utilization of ARP Input. Do you have any recomm...

Hi there,I just came across a small problem today. One of our remote offices is connected by an E1 line to our central site. The remote office has a 2621XM with an IOS 12.2(10b) and the central site has the same router with same IOS version. We want ...

Hi there I have a Cisco router which has 2 configured interfaces E0:201.139.xx.24 E1:200.201.xx.161 E0 has three hosts 201.139.xx.25(used) 201.139.xx.26(free) 201.139.xx.27(used) E1 has three host 200.201.xx.162(used) 200.201.xx.163(used) 200.201.xx....

Hi Attached is my network config where i need to give internet access to the LAN A users. At present LAN A users are using oracle on 64K circuit, the oracle server is on LAN B. I am using RIP.The problem is i can ping every PC in LAN B but not the In...

Hiwhen i configure 3 multicast routers with auto-RP, can i configure one of them configure with static.A.basic Mcast configureB. configure as RP with auto-RPip pim send rp-annouce lo0 ----ip pim send rp-discovery ----Cconfigure B as RPip pim rp-addre...