Routing

I have configured Cisco 1700 router with necessary DHCP commands (DNS, Default Router, Domain Name, Lease, Import all) but then too its unable to provide the IP addresses from the defined pool when the laptop is connected to it ! Also, When Sh ip dhc...

I have an existing frame relay T3 on a serial interface with multiple existing PVCs on sub-interfaces. Is it possible to configure 2 PVCs as additional sub-interfaces on this frame relay T3 and configure them as a multilink frame relay bundle withou...

Dear Sir, Please let me know how's the physical connection work in WS-X4248-RJ21V and how to check the status of the module like "show" command in case the module have been faulty. Please let me know as soon as possible. Your effort shall be highly ...

i have a problem with a ubr7100 series ,at some moment of the day the router cpu is overlodeaded (around 98% to 100%) of processing and it slowing the network i should restart it to continue normally. what can cause this problem

How would I configure automatic ISDN backup on a 2841 if my T1 fails?

I am configuring two 2650XM routers with 130mb memory and with c2600-ik9s-mz.122-21a code on it. After the config I do the "wr mem" and copy the config to startup and even to the flash and nvram but when it reloads it looses the config and asks me to...

I've got a requirement to use a WS-X2961-XL in a 2924M-XL to pull a PVC off of an ATM network and drop it off on an ethernet port.The WS-X2961-XL was discontinued long ago and I haven't been able to find much documentation on how to configure this th...

Is there any documentation anywhere that states an ACL will not work when compress stac is turned on for a synch serial interface? Is there any way to circumvent this behavior to be able to use an ACL and compression?Kind regards in advance.

Dear All, Around 30 to 35 ft away from our Divisional Office building, a Mobile Tower, by a certain Pvt. Company, is being erected for Mobile services to its customers. We are concerned but unaware of its adverse effect on our computer system an...

I have a facility that I am in the process of upgrading their LAN. They are moving from a router with a few swiches to a more campus environment. They will be running a 4506 as the core switch connected to a 2600 which is their WAN connecion. We run ...

Hi , I'm looking for any information regarding maximum number of concurrent TCP and UDP connections , which Cisco 3825 router can handle. Did not find any relevant stuff about it.thanx !

could any one give me a better perspective on DTE and DCE other thansaying DTE is a customer premise eq.and DCE is a carrier eq.thanks in adv.

Hello, well maybe this exist!!Would be very great to see for example when you redistribute a route (connected / static / Eigrp / etc) to another routing process in the Blue Box, what routes are getting applied to the redistribution when we use a rout...

helloi used to think that WIC2A/S speed is 128Kbps.however, when i connect it to 256Kbps, i can see by a WAN analyser that the speed can reach 256Kbps and there is no overrun errors in the show int s0.Is this normal?