Does anyone know if there is a way to perform Internet Speed to Internet from the router? it is my understanding that you can only measure/capture the input/output traffic of the interface. Is that a correct statement?
Does anyone know if there is a way to perform Internet Speed to Internet from the router? it is my understanding that you can only measure/capture the input/output traffic of the interface. Is that a correct statement?
i have gateway 196.204.80.240/29 ( i have 6 free ip use 241 for GW and others free )i can use 241 for example gateway and any one as real ipmy question is it better for the internet pool to make it like this :ip nat pool PUBLIC_POOL 196.204.80.241 19...
Hi, Can we configure Cisco router or Switch to provide DHCP to SSID Wifi clients with the setting of proxy and port number so the client will pass through proxy which will control the clients access Microsoft DHCP server can provide proxy and port nu...
I have my CISCO 1941 series Router, i create two sub-interfaces which passing internet and MPLS traffics respectively, but recently days i experience a certain scenario where by either of the links can goes down without and issue but when i shutdown ...
Hello all, I am having trouble understanding ACLs and the logic of inbound and outbound traffic. I am trying to allow network 192.168.1.0/24 to the FTPS server 192.168.3.0/24 only if an FTPS session originates from the 192.168.1.0/24 LAN. Network 192...
Hi, Is is true that router is a device that by looking at layer 3 header, in every station, changes layer 2 header? If yes, what does it mean? Regards,David
Hi Folks!Need your help for multicast, if possible.I have ISP router connected to my Cisco 2921 router, and this connected to two switches Cisco 2960.Everything works fine on all vlans, except TV. What I want is the ISP Set Top Box to work to see ISP...
What is the reason for this Output errors and what we can do to resolve this..? DialVPN_ASR1001#sh int gigabitEthernet 0/0/5GigabitEthernet0/0/5 is up, line protocol is upHardware is BUILT-IN-2T+6X1GE, address is 5c5a.c71d.cb07 (bia 5c5a.c71d.cb07)De...
Hello friends. I just finished configuring the Spa201R adapter. I switched from one company to another. I cannot make any calls. when I try to make outgoing calls, I receive a message saying: "That password is not valid". I don't know which password ...
I'm trying to do something a little bit different. I'll lay it out for you because I want to try and make something else work. So the modem - > Firewall then the firewall connects to two different ISRs, the reason why two is because I'm running HSRP ...
Hi, Need to migrate the same source/destination traffic to a new VPN (new peer). What are the steps I should follow as there is already a crypto map applied for the same traffic used by current VPN. How best to disable this so new crypto map (lower p...
If you connect to multiple sites or are a transport or service provider for multiple sites that are using private IP addresses meaning some may overlap and/or be the same (e.g. 10.10.10.0 for customer A and B) what would be the best options in terms ...
Hello.. is there any possibility to update ACL remark on the top of ACL without removing and adding ACL. ip access-list extended VC_ACLremark Match_VC_Traffic ---------------- to be updatepermit udp any range 16384 32767 any dscp cs4pe...
Hello Folks , We have an L2 trunk between cisco 3560 and cisco 4500. we have 7 ports bundled in that channel.we have both sides flow control disabled in/outreal traffic can reach to 5.5 G, but we still see output Drops only on 3560.At 4500 we don't s...
I am using a Cisco IOS-XE router. I would like to limit the bandwidth for both download and upload to 50 Mbps combined, it should be asymmetric meaning if a host is downloading at 10 Mbps, 40 Mbps should be available for either input or output.Follow...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-02-2024 11:33 AM | ||
09-30-2024 11:48 PM | ||
09-23-2024 06:56 PM | ||
08-07-2024 10:40 AM | ||
07-15-2024 05:07 AM |
User | Count |
---|---|
14 | |
11 | |
8 | |
6 | |
4 |