Hi, I've deployed a c8000v in AWS and applied the cloud init boot config but I cannot get the device to show as in Sync. If I try to deploy any template to the device it will perpetually stall and say control notification sent to device to pull confi...
Hi, We need to do a route from the branches to Azure, that when the connectivity to Azure Region A is down they can go through Azure Region B. How can we achieve that? Enviroment:2x vSmart 20.9.X2x vBond 20.9.X1x vManage 20.9.XcEdges at branches and ...
Hi, I am using 20.5.x and 17.5.1 SDWAN images in IOS XE SDWAN on ISR 4k. unicast is working fine but only multicast is problem.. Scenario 1 : when i use multicast RP (auto rp) on one site behind replicator only that site SDWAN router get RP registra...
Here is the tracker config: tracker tracker1endpoint-ip 8.8.8.8 It is applied here: vpn 0name VPN0_Underlay_VPNdns 4.2.2.2 secondarydns 8.8.8.8 primaryinterface ge0/0description INET1ip dhcp-clientnatrespond-to-ping!tracker tracker1 vedge1# show trac...
Dear all, we have Cisco Cloud hosted controllers with vManage running 20.6.1.We tried this deployment many times in our testing tenant with success but for some reason we cannot make it work in Production tenant. I am trying to to create Cloud Gatewa...
Hello Community, I need help to fix this issue I have been facing for a while now. I am trying to push configuration using the template features on vManage, but I keep getting the error in the attached that says "Device is Offline".Please note that t...
How SDWAN router with single MPLS wan link will from control connection with VB,VS & VM as MPLS is peer to peer VPN
If we convert any site TO SDWAN router then How SDWAN router will talk to Legacy sites .Please explain.
I am using below versions for my SD-wan LAB, I am able to install the "ROOTCA.pem" on this cEdge21(CSR1000v) successfully, and on vManage I can see the icon under my WAN Edge list changes correctly, but icon color is RED, see screenshot, and when I h...
Hello All, We run the BGP over the IP Sec Tunnel, so we need to create the PAT to translate the incoming IPs from FW 1 to the loopback interface to communicate with the other subnet in the firewall 2 via the loopback interface. so i need to know h...
Hello, I have a problem when I push Template from vManage to cEdge Router. I am getting the following errors [11-Jul-2024 18:10:59 EET] Configuring device with feature template: Taj-cEdge02_Template [11-Jul-2024 18:11:00 EET] Checking and creating d...
I have a PNETLab on a ESXi Server, and I started a SD-WAN test on my PNETLab. And I found I can't connect my vManage node to external network. As you know connection to external network is needed to to access vManage GUI environment, but there are on...
Hi Community,I have an SDWAN solution in the Cisco cloud, 2 vBond, 2 vSamrt and 1 vManage, and it is observed that their certificates are about to expire:Furthermore, it is observed in vManage that the authorization of the controller certificates is ...
do above command disturb control plane of Vedge or Vmanage connectivity?
Hello Community,I have an SDWAN solution, entering Vmanager in the Administration Settings option, it is observed that the "Web Server Certificate" is about to expire in 4 days.If said certificate expires, would the service be affected?How could I re...
