SD-WAN and Cloud Networking

I'm setting up a new cEdge in my lab, and when I applied a device template to it, it broke the routing so connectivity to the vmanage couldn't be established. I cannot go create a default route now (to make it work  temporarily) because the C-edge no...

Attempting to create and map vpc/vnet within vManage console. Regarding Elastic IPs, I have 2 EIPs in use and 8 set as my limit in AWS.  Please see error below; any help is appreciated. Thanks An error occurred (InvalidParameterValue) when calling th...

Interesting question, we have an interface on a cEdge configured as a "Last-Resort Circuit", the interface is connected to an LTE modem. When the interface is down, per the last resort configuration the dashboard is showing a partial Control Status. ...

Are there ways (several?) in Cisco SD-WAN (Viptela) to get local internet access from internal network that is using public ip-addresses on the inside so that nat is not wanted? Usecase is SD-WAN having only public internet as transport and having mu...

I am trying to establish control connection over MPLS transport (colour mpls and private 1), hence I have done NAT on my internet gateway FW. While checking on the controller and vEdge I could observe the vEdge is trying to establish session with vBo...

Hi, i am setting up an SD WAN over a MPLS backbone. When configuring the OSPF process in vManage it always enables the default information originate even I set it to off. Which results that each Router injects a default route into the MPLS backbone. ...

Hi, I would like to confirm the following regarding viptela web server. Supposed that the purpose of this certificate is to establish a secure connection between your web browser and the vManage server using authentication certificates.Q:What will ha...

Where do we find bug information regarding Viptela vEdge software? I have encountered bug id VIP-40991, and require more information such as workaround and fixed-in-release.

Hi experts, Customer wants to deploy DIA on remote branches with the following needs: To have   1) Public DNS for Internet sites   2) Private DNS for internal applications FQDN based, running  on the overlay at central site Is it possibe to achieve t...

Hello, I am performing my company's POC demo for Viptela. I am stick in installing the Certificate. The operation status is "CSR Submitted For Signing".Seems that I have send the CSR to Symantec but doesn't get response from them. May I know any prer...

I am trying to create in my ASA 5525X a Site to Site VPN tunnel between SiteA (my office) and SiteB (another company office). And to creat ACL and NAT tfor the traffic from SiteA to SiteB.so that users in SiteA can access multiple server in SiteB.Sit...