Server Networking

I'm not sure this relationship is as easy as it sounds.  I have a 2248TP connecting on uplinks 3&4 to two ports (25&26) of a Nexus 2010 N7K-M132XP-12 card.  I have followed the steps on CCO (install feature-set, activate feature-set, port-channel and...

We are migrating from using two Nortel 8600's running VRRP at the distribution to Cisco Nexus 7K's using HSRP.  So we have a server connected to two 3750G switches which then connect to the Nexi (previously the 8600's).  As soon as we connected the 3...

Hellow Nexus Gurus,I have had numerous instances where Broadcom NICs on Dell servers have started storming the LAN with directed ARP requests (unicast) for addresses off the subnet of the station sending the request.  I've had stations send 2GB of AR...

Nexus 5596UPRegarding RACLs and HSRPHow many HSRP groups does the Layer3 module support ? The Layer 3 module supports 2048 Racls .. What does that mean`?Is that the number of entries or the number of acls its supports ( and the acl can be as big as y...

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/layer2/503_n2_1/Cisco_n5k_layer2_config_gd_rel_503_N2_1_chapter8.html#task_35CE3B4AEE75485AB7A22C3A085D2F99Suspending Orphan Ports on a Secondary Switch in a vPC TopologyYou can suspend...

So we would really like to order some of the 5596UP switches with a few 2248 fabric extenders, but we need the ports in the front (without totally recabeling our entire data center).  How do we order the 5596UP and the 2248's with the airflow reverse...

FR:J'aimerai savoir si le GLC-T ( connecté à un des ports Hosts du  Cisco Nexus 2232PP) supporte  10/100/1000 Mbps ou 1000 Mbps seulement ?EN:I want to knew if a GLC-T connected to a host port of Nexus 2000 (2232PP) is considerated as a 10/100/1000 B...

Hi guys,I have a question the company has bought a 5108 Chassis,6 B-200 M2 blades and 2 6120XP for our test lab.But i need to know that how can i connect my 6120XPs to the Cat 3560 for uplink ethernet?I tried to use that SFP GigPort on the 3560 but i...

Hi,I guess I have reached a point where I have too many Vlans.  I created a few new ones and they are becoming errDisabled on various trunks (for some reason).  This, oddly, is only happening on one of the two vpc 7K peers.My error is:Tcam will be ov...

Hello,I think I have everything about the forwarding set up correctly but instead of going to my server the HTTPS port trys to access my routers web interface. I have the lines: ip nat inside source static tcp 192.168.10.20 443 interface fa4 443 ip n...

All models of the nexus 2000 has HDMI portInstallation guide says it is for console connectivity. There was no special cable supplied with Nexus 2000.anyone tried to use that port? I want to what type of cable connector to use to console in to the FE...