Server Networking

Hello, i search to limit bandwith on cisco 2950 switch.I know that i can fix the bandwith to 10 or 100 Mb but i want to define it to 1Mb for example.Thanks for your help.

I am evalulating a hospital LAN which has 3 access switches (144 ports) connected to each other with fiber and then collapse on a single fiber run back to the core. I have calculated a 14 to 1 bandwith ratio. 14Gb access ports to 1 Gb fiber uplink po...

Hello!!Could somebody help me with this?We have a dlsw network of almost 1600 remote dlsw peers.We have six central peer routers.Sometimes we saw some SNA PU´s down, and after 1 to 3 min return to "CONNECTED" (dlsw circuit). We dont´n see any dlsw pe...

I am wondering if there is a way to control the behavior of the master dlsw router if it fails and circuits are established on the slave dlsw router. The lab testing I have done shows that once the master dlsw router is back online, the circuits tea...

I have some qtns in relation to the following url:<http://www.cisco.com/en/US/products/hw/modules/ps2706/products_configuration_example09186a00801aca55.shtml>I want to be clear on the 'Packet Flow' and points of port translation from client->csm->sca...

Hello,I'm looking for 'Support Pages' if any for cat65k CSM module. I have found ample documentation etc but I normally begin with support docs before touching basic and advanced config guides... Any help would be appreciated.regardsAjaz Nawaz

Hi,We have several 6513 switches here and have terrible wiring messes on them. The problem is that since they are such high density switches the cables are all bunched up in the blades. We have cable management on the sides and the top/bottow of th...

Attaching a remote Stratus controller we got the following error during XID negotiation: %SNASW-3-CS_LOG_6: PROBLEM - 1766 - XID protocol error during activation exchangeThe XID sent by the IOS contains following the CV22:22 07 00 09 00 10 16 00 00 T...

What has to happen on routers to support DLUR processing. The router is supposed to take snasw and transform it to dlsw and ship it on down to another router that takes the dlsw and changes is to san and ships it to a 3174 controller.

Hi all, I'm looking for deep/up-to-date documentation on design and implementation of Cisco switched L2/L3 high-availability, for application to data center environment. Does anyone know if some comprehensive document exists? Thanks

Hi, for redundancy purpose windows 2003 server is connected to two switches. how to use two links affectively and what is the configuration required on server?Regardsskrao

Hi,We've currently a data center based on Layer 2 with many inter building links blocked by STP. To simplify a little bit the layer 2 topology (and improve inter-building link usage) i would like to introduce EoMPLS inside my Data Center core. Is tha...