Our DNA Center recently stopped sending events to syslogDNAC version: 2.3.5.6Are there any troubleshooting steps we should perform? "Try-It Now" from the Event Catalog is working (syslog server receives the event), but the subscriptions have stopped ...
-
-
-
-
This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community
-
Forum Posts
Resolved! AP migration from traditional to SDA
Hello team, I have a concern regarding the migration from traditional network to SDA, especially for the wireless part. This will be a full migration as we have 9k switches and 9k APs that we will convert to SDA. We have the 2 border / control plane ...
Where can I find the training video for "Overview of Software Defined Access", please.
Hello together,i have running multiple sda sites and already have devices with roles like BN, CP, E and so on.Now i must change the loopback0 address to another IP.I tested it and saw that all lisp sessions goes down and devices not able to update li...
Hi All-We are i the process of building out our fabric. Included in the design will be a stack of 9300s as a L2 Border handoff. I read https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/cisco-sda-design-guide.html#L2_Border_Handoff but still...
HiWhen I try to assign ports to address pools in SD Access not knowing that the device is offline it fails as expected but in the Port assignment area of DNAC it maintains the intended port assignment. How do we ensure this is then pushed out to the...
Hi All,So when updating switches I noticed that a lot of my C3560CX-12PC-S switches are being split up in different platformsMost of them are in C3560C platform but that should be incorrect because the switch says there C3560CX-12PC-SSo i there a wa...
Hi Guys, I spotted these errors in the DNAC and i was wondering is this a concern or is it normal? I can create and remove these as i would expect but the error indicates its associated to a VN and this must be removed before deletion. Can anyone exp...
Resolved! Enabling IP Directed broadcast in SDA
Hello all,We are running DNAC 2.3.5.5-70026. We have a subnet pool (vlan) dedicated to card readers which are silent hosts. In order to overcome problems related to silent hosts, we decided to enable ip-directed broadcast (and L2 flooding) for the sp...
Hi Folks,Just wondering if this is possible. I look at DNAC and in the fabric site SSIDs i have to assign an IP pool. If I wanted an SSID VLAN to be deterministic of a dynamic VLAN from ISE is this not possible?ThanksJ
Hi All,I'm currently working on another SDA design that will comprise of roughly 25 fabric sites with a total of 1k fabric edge nodes. All sites are connected togther using a Metro-E service in a hub and spoke topology with the main campus site being...
Hi Guys, I know that in the SDA, the latency of each SDA components is very tight. When designing an SDA, how can we know if we can meet the RTT? For example, from my Edge switch to my DNAC or AP to my WLC and WLC to my DNAC, how do we know if RTT is...
Hello!I have used this guide to configure our SBEN https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-management/dna-center/2-3-5/user_guide/b_cisco_dna_center_ug_2_3_5/b_cisco_dna_center_ug_2_3_5_chapter_01110.html...
Resolved! Trustsec and static mappings
HiI'm testing Trustsec in my SD Access lab. I can assign 2 ports on edge switches to different groups then apply a policy that blocks pings and it works fine. I'm not authenticating the users so I statically assign an SGT via DNAC when I assign the...
Dears, We are running 2 ISE VMs in one ESXI Server and we are looking to migrate both of them one by one to two UCS Servers running under micorosft windows server standard 2022, The ISE is integrated with Firepower and DNAC , we are looking for way ...
