Storage Networking

Hello I just thinking if i can connect two of Cisco C9148S MDS SAN switch or it not applicable, I have a storage with two MDS's at "Site-A" and UCS Server with one MDS at "Site-B" as the below figure:Please need to know if i can connect "SAN-2" with ...

Hello I am just asking if i can using Nexus C3548P-10GX switch as SAN switch to be connected between the storage and servers.Appreciate your support Thanks

Hi Guys, PID: DS-C9148S-K9 Since 5 months ago till now, In my Cisco MDS 9148 16G SAN switch has shown some frequent error logs as below, 2008 Dec 22 08:57:09 PROD-CISCO-SAN-SW2 %PMON-SLOT1-3-RISING_THRESHOLD_REACHED: TX Credit Not Available has reach...

Hi community, I am a bit stuck and I would appreciate if any of you could help me.I want to get the information equivalent to the command "show flogi database interface XXX" and find for each port if I have any active login but with SNMP, so far I'm ...

I've previously worked on a the Nexus line of products for SAN switching, but now looking at a configuration requirement for a pair of MDS switches.  The switches will be in 2 separate locations and connected to each other via fiber interconnects.  M...

Is it normal to have "Not avaiable" under connected interface for "show fcns database detail" on a native FC target device?port-wwn (vendor) :10:01:d0:49:ea:52:9a:f0node-wwn :10:00:d0:39:ea:52:8a:f0class :3node-ip-addr :0.0.0.0ipa :ff ff ff ff ff ff ...

I think there is typo on the page Recommended Releases for Cisco MDS 9000 Series Switches  I saw 6.2(33) started to work on 9718. Is it typo ? May I request the page owner to correct the page? Thanks! 6.2(33) can only work on 9710,9706 with sup1.  No...

Hi all, I know there is plenty online about basic vs enhanced, but I can’t seem to find answers to a couple of questions I have about it, hoping someone can help.1. is the ‘zoneset name distribute full’ command a one time thing or does it need to be ...

I'm very new to Cisco MDS in general. Just wondering for the best practice in retrieving the server WWPN to use for a zoning config - is it best to retrieve the ones defined in the HBA FC ports of the server (CIMC) or in the OS layer (Linux, systool ...

We are simply trying to create a device-alias, which we have done many times before without issue, but now we are getting this error on commit:  "zone: Device-alias enhanced zone member present"switch-a# config tEnter configuration commands, one per ...

Estimados, buenas tardes. Para una licitación hemos presentado el Cisco MDS 9132T (DS-C9132T-MIK9) con licencia Enterprise (M9100ENT1K9). Ahora, el cliente nos pide información sobre administración de zonificación por web GUI 100% compatible con Wind...

I am trying to figure out if there is a default control-plane policy on the Cisco MDS 9148's? I havent been able to find documentation on it and dont see any options for the show commands.