Switches - Small Business

 Hi it is almost 3 days I'm trying to configure VLANs on this switch, hope someone may help.I asked friends and Cisco users but I decided at the end to use the community to try to sort out issues.   I've several of these switches at customer sites, t...

I have a SG300 switch in L3 mode. This is what I have right now: Switch boots into VLAN 1. I wanted to create a second VLAN 2, 10/24 subnet. 84.5.163.129 is the external router switch is connected to. The routing table: S 0.0.0.0/0 [1/1] via 84.5.16...

Hi,i was checking the datasheet of 500X series and got confused regarding the 10GE uplinks. how many 10GE ports can be used for uplink and which transceiver should be used for 10GE copper uplink? for example, SG500x-24 switch has 24GE ports and 4x10G...

Hello,I've purchased a Cisco SG500X 48-Ports+4 10GBe in orderto create 2 or more VLANs. The goal is to have separatedLANs for VMware and Windows Server, all togetheron the same physical network.I've created 3 VLANs so far. The default one, VLAN1 (192...

I'm using a Cisco SG200-08 in my private home network running the latest firmware to date (1.0.8.3) and I'd like to know if there are any plans in adding support for IGMPv3 in the near future. As more and more ISP are offering IPTV services these day...

Getting some poor iperf results as shown below. Only in one direction. Doesn't matter what network segment I target in that site. C:\Temp>iperf.exe -c x.x.64.x -d------------------------------------------------------------Server listening on TCP port...

I am having trouble connecting a SF302-08MPP to a console server.  I have tried several variations on the Cabling DB-9 to RJ-45, and believe it is something to do with the AutoBaud detection.  Has anyone seen this before, or been able to connect thes...

Dear team, could you confirm if CDP is supported on SG200-08P with FW version 1.0.8.3? Thanks, Nenad

I have one WAN connection to the ISP. I would like to separate guest (wireless) internet of the company network, for this is there already a  Vlan 2 set on the ISA570W. this Vlan Is routed to the internal access point and i routed to ethernet port fo...

Hi! I have problems with SG500x24P v02, trying to update to last boot version. What i already tried ..steps: 1.Factory reset unit. BootVer 1.3.0.03 Firmware 1.3.0.62 2. Accessing thru GUI 192.168.1.254 gave access to ssh 3. Connecting with putty sho...

I am unable to get my SF110D switch I bought for home use to kick its PoE into life to power an 7940 IP phone. I have tried all I can, namely: a) The PoE switch runs both 3.5 and 13.5 watts PoE when tested with a Fluke meter b) The phone boots corre...

We're looking to install an IDS system internally.  The system requires that the switch port it's plugged into be mirrored/spanned to all the other ports (to sniff all the traffic it can).  The switches we currently have do not support port mirroring...