Switches - Small Business

I want to install a SonicPoint on an existing SRW224G4P switch.  Sonicwall architecture uses VLAN to support multiple SSID on SonicPoint.  Sonicwall interface X0 attached to port e12 on the switch, and the Soncipotn on e24, which is PoE enabled.  In ...

Hi,Where to find Debug guide for SMB Switches?

HiI wanted to know what is the meaning of the last 2 letter at each of SKU ID.Is that a country code? If in Malaysia which one should I look for?SRW2008P-K9-AU SRW2008P-K9-JP SRW2008P-K9-EUSRW2008P-K9-NASRW2008P-K9-UKThanksRegards

I have a SG300-28 and would like to configure through CLI not menu. How do I get to Cli from Menu?  I am running Boot version 1.0.0.4 and SW version 1.0.0.27, Do I need to upgrade both boot and SW or Just SW?

Hello,I have problem with simple VLAN:I change switch to layer 3 system mode.To port 1 I have connected router. I create 2 vlans:VLAN settings: vlan id 2    and vlan id  4I go to Port VLAN Membership and I join vlan to GE2 2T, GE3 2T, GE4 4T, GE5 4T ...

Hi there,We have several SG300 series switches in our LAN. Yesterday, I was patching one to the actual firmware. When booting it up, I found a feature in the telnet session that promises me to set a stacking ID.I didn't find any info in the cli manua...

Hi,I have a couple of SG500X Switches which need to be configured and I wanted to do this with a central managed tool to have an uncomplicated way to configure the switches.I already found Cisco Configuration Assistant, which supports the 200 and 300...

how to config web authen on new firmware 1.3.5 of 300 and 500 series

Hello,The company I work for has some Cisco hardware in the plant and, as our team has no expertise on configuring Cisco switches I hope you can help me and my team to get this problem solved. I will make a brief comment on what is going wrong here:I...

Dear support,Can Cisco 500 series switches deliver 24V on the access port for POE operation?Best Regards

I want to install a SonicPoint on an existing SRW224G4P switch.  Sonicwall architecture uses VLAN to support multiple SSID on SonicPoint.  Sonicwall interface X0 attached to port e12 on the switch, and the Sonicpoint on e24, which is PoE enabled.  In...

                   I would like to connect a Sonicpoint to an installed Cisco SRW224G4P switch.  Sonicpoints support multiple SSIDs, each on a VLAN.  One VLAN is Corporate (20) another Guest (30).  Guest pointing outward to internet only via firewall...