Switches - Small Business

I have read over quite a few of thes, and either can't seem to find my answer....OR can't recongize that was my answer!I have 2 vlans, vlan1 (secure) vlan2 (guest wifi).  Vlan1 is getting ip from DHCP server 10.10.11.x.  Vlan2 is getting IP from DHCP...

Hello All,My company is currently having issues with the SG 200-08, in that when we're sending an Ethernet Frame through the switch consisting of an 802.1Q VLAN 0 priority tag and custom payload, the smart switch is stripping the 802.1Q tag from the ...

Morning. I think ive configured a few hundred switches, maybe a thousand in my time, but never have a faced such horribleness that is the SG-300. After this week, I think ill refuse to touch them.Got 2 voice vlans and running a few vrf's on a 3750 st...

I have two SG300's, one is setup as Layer 3 and the other is setup as Layer 2.On the Layer 3, I have voice vlan 100 setup with IP 10.10.10.1. I have turned off Spanning Tree and Smart port. Vlan 1 is setup for all other devices on the network. All ph...

Dear All;I am facing problem in configuration with SF-200-24P Switch . I am failed to configure two vlans on same access port i.e. data vlan and voice vlan. there isan option of auto voice vlan with vlan 1 and i changed to our voice vlan i.e. vlan 10...

I have a third party SSL cert that I would like to import into my SG500.Unfortunatly, the web interface truncates the input of my cert.So I tried through the CLI but all i get is "no certificate was entered".My guess is that the SG500 does not suppor...

Hi,we are having a Cisco sg 300-28 switch,the only thing I can use at the moment is web interface.I need to run command lines,but when I tried using the putty.exe(ssh),it does not work.Can someone give me some idea how to use command lines instead of...

Hi! I'm  linking two Cisco switch SG500X and do not want them in stacking , then  set up the two switch one chanel -group with four ports for me to  ensure high throughput between two devices . I'm  transferring files from a PC connected to the fir...

I deleted a file by mistake SRW224G4P_SRW248G4P_boot.bixI have uploaded the file SRW224G4P_SRW248G4P_image.bix by HyperTermina to XMODEM and it is ok but runs Switch LED power light flashes orange. Blinking rapidly ...Image Loader 1.0.1<ERR> Diagnost...

Hello,Our office lan running on 2 * SG 300-28 28-Port Gigabit Managed Switch.PID VID:SRW2024-K9 V01 Firmware Version (Active Image):1.0.0.27 The users are seeing there connection to fileservers(mapped network drives) slowing down over the period.We h...

Hi everyone,I'm looking to pick these up for a company with a growing network. I'm, however, confused about the SFP(+) ports. Ok, so there are 4 of them that can work at 10 gigabit speed simultaneously.What is the purpose of the 2 additional 5 gigabi...

hi,I am trying to set a ip-helper address on my sg300 though getting the following.DNSWITCH01#configureDNSWITCH01(config)#interface vlan2DNSWITCH01(config-if)#ip helper-address 192.168.1.1% missing mandatory parameterDNSWITCH01(config-if)#DNSWITCH01#...

HelloI really need help with Inter vlan routing via Kerio Controll 7.4.1. I have several SF300-24P switches (IOS 1.3.0.62) and i have created a several VLAN's.Vlans: Vlan 10, 100, 200 and interface vlan 213 (for management).I can ping hosts in the sa...

I posted this originally on the Linksys board, but they directed my here...I have a Linksys SD2008 main 8-port switch.  Connected to this, I have THREE 5-port switches from DLINK, each on its own SD2008 port.1) My DSL provides 10 Mbps maximum.2) On t...