Switches - Small Business

We have recently purchased a SG300 to break up our network which most consists of virtual machines via Bridged networking on network machines. I have created successfully Vlans and the physical machines are capable of communicating across the differe...

We have about 20 clients on our SBS network. I purchased a SG300-28 about 3 months ago, and at first everything was fine. Then a few weeks ago some users with 100M network cards started reporting that their pc's were very slow. Today I went to those ...

Hello! Can you provide me information, does SLM2008T-EU support DHCP Snooping? I couldn't find it in documentation

how to Buy SF302-08MP . I am unable to locate this product under the Cisco Dynamic configurator tool

Hello frends,I'm using switch at our IP camera security systems in below.SRW208MP-K9-EU(2 pieces)SRW224G4P-K9-EU(4 pieces)SLM2024PT-EU(1 piece)with Supermicro Server System and Cat6 cabling.All of them is poe switch.(I think, you know)I feed 36 IP ca...

Hello to all,We have a Cisco 887 router and a Cisco SG-200 switch.We'd like to setup trunking between these 2 devices for multiple VLANs on the switch to be made available on the router.With previous routers, you could set the router up in the config...

Hello,I have purchased a Cisco SF 302-08P 8-port 10/100 PoE Managed Switch with the intention of creating VLAN's for my home network. The idea behind this set up is having 1 network for gaming and the other for work. I am thinking on having 2 separat...

Hello!I have number of SF300 switches in production and have found bug with command "interface range".When I reconfigure interfaces previously configured with "interface range" to different VLAN interface change VLAN, but after reboot it move back to...

HiDoes anybody know which wrr queue in sge2110 has the highest priority? We can use weight 1,2,4,8 as described in manual, but i'm not able to find information which weight defines the queue with the highest priority?In the simple way -  which weight...

Please see attached Diagram.  With my current setup, it doesn't seem like traffic is moving from FE8 to FE7 on Switch #2.  Any suggestions?My Desired Outcome:Have Multiple VLANS on FE8 on Switch #2 talk with their respective VLANS on FE7My current se...

How does the ESW 500 or SF300 line guarantee QoS of voice traffic when trunking switch to switch? I have (2) ESW 500 series switches in series. The phone on switch 1 have no audio issues, but the phones on switch 2 (the last in the series) have inter...

Hi All,I have an SG300-52 gigabit switch that has been constantly rebooting and is effectively unusable.This started after Enabling TCP Congestion Avoidance, specifically:Turned on TCP CASaved Running Config -> Startup ConfigRebooted SwitchSince then...

I was given a linksys SRW224G4 switch .. It seems to work fine on some ports and others dont .. I am tring to log into it to see what the current config is .. but no luck .. I cant seem to find what ip address its pulling to be able to log into the w...

I am getting the following message in my logs on SF300-8"%CDP-W-NATIVE_VLAN_MISMATCH: Native VLAN mismatch detected on interface fa1."What is causing the error, see VLAN setup below: